VND14NV04-1-E
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 6 months ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-251-3 Short Leads, IPak, TO-251AA |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | OMNIFET III™, VIPower™ |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Resistance | 35mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Power Dissipation | 74W |
| Terminal Position | SINGLE |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.25mm |
| Base Part Number | VND14 |
| Pin Count | 3 |
| JESD-30 Code | R-PSIP-T3 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 18A |
| Interface | On/Off |
| Nominal Supply Current | 100μA |
| Output Configuration | Low Side |
| Power Dissipation | 74W |
| Output Current | 12A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 100μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 12A |
| Continuous Drain Current (ID) | 12A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 40V |
| Turn On Time | 4.5 µs |
| Output Peak Current Limit-Nom | 18A |
| Rds On (Typ) | 35m Ω (Max) |
| Drain to Source Resistance | 35mOhm |
| Turn Off Time | 25 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Length | 6.5mm |
| Width | 2.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VND14NV04-1-E Overview
It's?packaged?in?the way?of?a?Tube.This file is included in package TO-251-3 Short Leads, IPak, TO-251AA.The LED driver is mounted as Through Hole.There is a switch type of General Purpose.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.There are 1 outputs available on this lighting driver.Operation is based on Not Required supply voltage.A maximum output voltage of N-Channel volts can be obtained with this LED driver.It comes under the family of VND14.It consists of 3 terminations in total.The LED driving board has a total of 1 functions.To meet the operation criteria, the maximum output current drops to 18A.Through Hole is mounted in the way.The LED driver has a total of 3 pins.In this LED driving board, there is 35mOhm resistance.It is part of the OMNIFET III?, VIPower? series.As a result, the output current is set to 12A.A maximum current requirement of 100μA is required for its operation.
VND14NV04-1-E Features
Resistance of 35mOhm
VND14NV04-1-E Applications
There are a lot of STMicroelectronics VND14NV04-1-E Power Switches ICs applications.
- Storage Drives
- Portable Music Players
- Hot Swaps
- Portable GPS
- Wireless Modem Data Cards
- USB3.1 Power Delivery
- Wireless Headsets
- USB Power Distribution
- Portable/Handheld Devices
- Portable GPS Device