VND14NV04-1
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 8 months ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-251-3 Short Leads, IPak, TO-251AA |
| Number of Pins | 3 |
| Weight | 3.949996g |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | OMNIFET II™, VIPower™ |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Resistance | 35mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 74W |
| Terminal Position | SINGLE |
| Number of Functions | 1 |
| Terminal Pitch | 2.25mm |
| Base Part Number | VND14 |
| Pin Count | 3 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 12A |
| Interface | On/Off |
| Nominal Supply Current | 100μA |
| Output Configuration | Low Side |
| Power Dissipation | 74W |
| Output Current | 12A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 100μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Continuous Drain Current (ID) | 12A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 40V |
| Turn On Time | 4.5 µs |
| Output Peak Current Limit-Nom | 18A |
| Rds On (Typ) | 35m Ω (Max) |
| Drain to Source Resistance | 35mOhm |
| Turn Off Time | 25 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Length | 6.5mm |
| Width | 2.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VND14NV04-1 Overview
The package is in the form of a Tube.The TO-251-3 Short Leads, IPak, TO-251AA package contains it.Through Hole is the mounting type of the LED driver.There is a switch type of General Purpose.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.The LED driver has 1 outputs.To operate, it needs a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts.It belongs to the family VND14.It consists of 3 terminations in total.The 3 pins are used to operate the LED driver.The LED driving board has a total of 1 functions.This operation requires the maximum output current to be decreased to 12A.As a result, it is mounted in the manner of Through Hole.A total of 3 pins are included in this LED driver.Currently, the LED driving board has a resistance of 35mOhm ohms.It belongs to the OMNIFET II?, VIPower? series.When this case is used, the output current is set to 12A.For its operation, a maximum current requirement of 100μA is required.
VND14NV04-1 Features
Resistance of 35mOhm
VND14NV04-1 Applications
There are a lot of STMicroelectronics VND14NV04-1 Power Switches ICs applications.
- Portable/Handheld Devices
- Set-Top Boxes
- USB Power Distribution
- USB Ports/Hubs
- Telecom and Network Systems
- PDAs
- Handheld Devices
- Hot-Swap Systems
- Wireless Headsets
- Portable Devices