VND10N06-E
| Parameters | |
|---|---|
| Turn On Delay Time | 1.1 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 200 ns |
| Continuous Drain Current (ID) | 10A |
| Ratio - Input:Output | 1:1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 60V |
| Output Peak Current Limit-Nom | 10A |
| Rds On (Typ) | 150m Ω |
| Drain to Source Resistance | 150mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height | 2.4mm |
| Length | 6.6mm |
| Width | 6.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 20 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Number of Pins | 3 |
| Packaging | Tube |
| Series | OMNIFET™, VIPower™ |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 2 |
| Resistance | 150mOhm |
| Max Power Dissipation | 35W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Terminal Pitch | 2.28mm |
| Base Part Number | VND10 |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 10A |
| Interface | On/Off |
| Nominal Supply Current | 150μA |
| Output Configuration | Low Side |
| Power Dissipation | 35W |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 150μA |
| Input Type | Non-Inverting |
VND10N06-E Overview
As a result, it is packaged in the form of a Tube.The TO-252-3, DPak (2 Leads + Tab), SC-63 package contains it.In this case, the LED driving board is mounted as Surface Mount.General Purpose is the switch type that it owns.The LED driver is equipped with 1 outputs.The LED driving board operates with a supply voltage of Not Required.It has a maximum output voltage of N-Channel volts.There is a VND10 family of things that it belongs to.In total, there are 2 terminations.The operation is carried out using the 3 pins.It contains 1 functions.This operation requires the maximum output current to be decreased to 10A.Surface Mount is mounted in the way of this LED driving board.It has a resistance of 150mOhm.A component of this type is included in the OMNIFET?, VIPower? series.This results in a 6A output current.It has a maximum current requirement of 150μA.
VND10N06-E Features
Resistance of 150mOhm
VND10N06-E Applications
There are a lot of STMicroelectronics VND10N06-E Power Switches ICs applications.
- Hot-Swap Systems
- Gaming
- Portable Video Game Players
- Smartphone and PDA
- HDD and SSD
- Storage (HDDs, SSDs)
- Telecom and Network Systems
- Notebook PC
- USB Protection
- Hot Swap