VND05B-11-E
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Heptawatt-7 (Horizontal, Bent and Staggered Leads) |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Max Power Dissipation | 59W |
| Base Part Number | VND05 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 1.6A |
| Interface | On/Off |
| Nominal Supply Current | 35μA |
| Output Configuration | High Side |
| Power Dissipation | 59W |
| Output Current | 9A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~26V |
| Fault Protection | Open Load Detect, Over Temperature |
| Rds On (Typ) | 200m Ω (Max) |
| RoHS Status | ROHS3 Compliant |
VND05B-11-E Overview
As you can see, it's packaged in the way of a Tube.This package is included in Heptawatt-7 (Horizontal, Bent and Staggered Leads).It has been mounted as Through Hole on the LED driver.The switch type is General Purpose.To ensure reliable operation, set the temperature to -40°C~150°C TJ.There is a default setting of 2 for output.Operation is based on Not Required supply voltage.It produces a maximum output voltage of N-Channel volts at its maximum output.It has a total of Status Flag features.It is a member of the VND05 family.For operation, we use the 7 pins.As a result, the maximum output current is reduced to 1.6A in order to meet the operation requirements.Through Hole is mounted in the way.This results in a 9A output current.
VND05B-11-E Features
VND05B-11-E Applications
There are a lot of STMicroelectronics VND05B-11-E Power Switches ICs applications.
- Handheld Devices
- Portable GPS
- Low Voltage I/O System Power
- USB Ports/Hubs
- Solid State Drivers
- Wearable Devices
- USB Power Distribution
- Wireless Headsets
- Portable GPS Device
- PDAs