VNB14N0413TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-3, D2Pak (2 Leads + Tab), TO-263AB |
| Number of Pins | 3 |
| Packaging | Tape & Reel (TR) |
| Series | OMNIFET™, VIPower™ |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Power Dissipation | 50W |
| Technology | MOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | VNB14 |
| Pin Count | 4 |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 14A |
| Operating Supply Voltage | 18V |
| Interface | On/Off |
| Nominal Supply Current | 250μA |
| Output Configuration | Low Side |
| Power Dissipation | 50W |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 250μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 35V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Turn On Time | 0.5 μs |
| Output Peak Current Limit-Nom | 14A |
| Rds On (Typ) | 70m Ω (Max) |
| Turn Off Time | 7.5 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Height Seated (Max) | 4.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VNB14N0413TR Overview
It is package in Tape & Reel (TR) case.It's included in the TO-263-3, D2Pak (2 Leads + Tab), TO-263AB package.A Surface Mount mounting is used for the LED driving board.General Purpose is the type of switch owned by it.There are 1 outputs available on this lighting driver.The LED driving board is powered by a voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.Status Flag features are available on the lighting driver.It belongs to the VNB14 family.A total of 2 terminations can be found in it.The operation is performed through the 3 pins.The LED driving board has a total of 1 functions.In order to meet the operation criteria, the maximum output current drops to 14A.The lighting driver is mounted in the direction of Surface Mount.This LED driver is equipped with a total of 4 pins.It has 70mOhm resistance.This electrical component can be found in the OMNIFET?, VIPower? series.This case has the output current set to 10A.Optimal efficiency requires a voltage of 18V.It requires 250μA current to operate.
VNB14N0413TR Features
Resistance of 70mOhm
VNB14N0413TR Applications
There are a lot of STMicroelectronics VNB14N0413TR Power Switches ICs applications.
- Telecom and Network Systems
- Hot Swap
- PC Cards
- PDAs
- Mobile Communication Devices
- USB Power Distribution
- USB3.1 Power Delivery
- Notebook PC
- Notebook and Tablet Computers
- Portable GPS