VNB14N04
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-3, D2Pak (2 Leads + Tab), TO-263AB |
| Number of Pins | 3 |
| Weight | 329.988449mg |
| Packaging | Tube |
| Series | OMNIFET™, VIPower™ |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 50W |
| Technology | MOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VNB14 |
| Pin Count | 4 |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 14A |
| Operating Supply Voltage | 18V |
| Interface | On/Off |
| Nominal Supply Current | 250μA |
| Output Configuration | Low Side |
| Power Dissipation | 50W |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 250μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Characteristics | OPEN-DRAIN |
| Continuous Drain Current (ID) | 14A |
| Output Polarity | TRUE |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | SCHMITT TRIGGER |
| Voltage - Load | 35V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 42V |
| Turn On Time | 0.5 μs |
| Output Peak Current Limit-Nom | 14A |
| Rds On (Typ) | 70m Ω (Max) |
| Drain to Source Resistance | 70mOhm |
| Turn Off Time | 7.5 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Height Seated (Max) | 4.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VNB14N04 Overview
The package is in the form of a Tube.It is included with the TO-263-3, D2Pak (2 Leads + Tab), TO-263AB package as well.It has been mounted as Surface Mount on the LED driver.The switch type is General Purpose.The LED driver has 1 outputs.The LED driving board operates with a supply voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.This LED driving board is equipped with Status Flag features in order for it to be useful.There is a VNB14 family of things that it belongs to.It contains 2 terminations.During operation, the 3 pins are used.There are 1 functions of the LED driver.The maximum output current must drop to 14A to meet the operation criteria.The lighting driver is mounted in the way of Surface Mount.A total of 4 pins are present on it.Currently, the LED driving board has a resistance of 70mOhm ohms.The OMNIFET?, VIPower? series includes this electrical component.This case results in a 10A output current.In order to achieve the best efficiency, the supply voltage should be set to 18V.It requires a maximum current requirement of 250μA.
VNB14N04 Features
Resistance of 70mOhm
VNB14N04 Applications
There are a lot of STMicroelectronics VNB14N04 Power Switches ICs applications.
- USB Power Distribution
- Wearable Devices
- Hot-Swap Systems
- Wireless Headsets
- Mobile Communication Devices
- Smartphone and PDA
- Gaming
- Set-top-box
- Portable Devices
- Notebook PC