VN920SP-E
| Parameters | |
|---|---|
| Factory Lead Time | 18 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 15mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 96.1W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VN920 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 5mA |
| Output Configuration | High Side |
| Power Dissipation | 96.1W |
| Output Current | 30A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 45A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Rds On (Typ) | 15m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.65mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN920SP-E Overview
Tube is how it's packaged.There is a PowerSO-10 Exposed Bottom Pad package that includes it.This lighting drivere has a mounting type of Surface Mount.There is a General Purpose switch type associated with it.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.It is possible to use 1 outputs in the lighting driver.A voltage of Not Required is used to power it.The maximum output voltage is N-Channel volts.The lighting driver has Auto Restart features.It comes under the family of VN920.It contains 10 terminations.During operation, the 10 pins are used.The LED driver has 1 functions.It is possible to achieve a high level of efficiency with a supply voltage of 13V.Surface Mount is mounted in the way of this lighting driver.A total of 10 pins are present on it.Currently, the LED driving board has a resistance of 15mOhm ohms.It belongs to the VIPower? series.The output current is set to 30A in this case.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.The lighting driver is configured to have a maximum supply voltage of 36V (Vsup).This part has a power supply of 8/36V.In order to maximize efficiency, the supply voltage should be set at 13V.
VN920SP-E Features
Supplied from 13V
Resistance of 15mOhm
VN920SP-E Applications
There are a lot of STMicroelectronics VN920SP-E Power Switches ICs applications.
- Portable Devices
- Portable Music Players
- Smart Phones, Feature Phones
- Wireless Modem Data Cards
- Set-top-box
- Solid-State Drives
- Telecom and Network Systems
- PC Cards
- USB Power Distribution
- PDAs