VN772KTR-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | OMNIFET II™, VIPower™ |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 60mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | DC Motors, General Purpose, Relays |
| Max Power Dissipation | 6W |
| Technology | Power MOSFET |
| Voltage - Supply | 5.5V~36V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 13V |
| Terminal Pitch | 1.27mm |
| Base Part Number | VN772 |
| Pin Count | 28 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 36V |
| Interface | Logic |
| Nominal Supply Current | 5mA |
| Output Configuration | Half Bridge (2) |
| Power Dissipation | 6W |
| Output Current | 6A |
| Max Supply Current | 5mA |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 36V |
| Output Current per Channel | 9A |
| Voltage - Load | 5.5V~36V |
| Fault Protection | Current Limiting, ESD, Open Load Detect, Over Temperature, Over Voltage, Short Circuit, UVLO |
| Turn On Time | 2.3 μs |
| Output Peak Current Limit-Nom | 9A |
| Rds On (Typ) | 120m Ω (Max) |
| Turn Off Time | 16 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Load Type | Inductive |
| Height Seated (Max) | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN772KTR-E Overview
Tape & Reel (TR) is used to package H bridge.A cost-saving measure, H bridge is included in 28-SOIC (0.295, 7.50mm Width).Based on 5.5V~36V, improved reliabilbridge drivery can be achieved.Surface Mount is mounted on H bridge circuit.In order for -40°C~150°C TJ to function normally, motor driver H bridge needs to be kept at a certain temperature.This tool is useful for a number of applications, including DC Motors, General Purpose, Relays.On the PCB H gate is mounted using Surface Mount.As H bridge ic of its specific characteristics, it also possesses Status Flag.Transmission lines can be terminated with a termination that matches the characteristic impedance of the line using 28 terminations.It is used as a pronged contact as H bridge ic of a signal interface when 28 pins are used.Its base H bridge ic number, VN772, is used to identify related H bridge ics.To operate H bridge circuit, a voltage supply of 13V is required.A H-bridge in the OMNIFET II?, VIPower? series, this is a type of electronic H-bridge.As a result of the current flowing through the output and power supply pins, there is a current of 6A.It is made up of two 28 pins that work together to perform the specific functions of this bridge driver.The Hbridge has 4 outputs.A high degree of efficiency is achieved by maintaining the operating supply voltage at 36V.
VN772KTR-E Features
Available in 28-SOIC (0.295, 7.50mm Width) Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : VN772
Number of Receivers: 36V
VN772KTR-E Applications
There are a lot of STMicroelectronics VN772KTR-E Full Bridge Drivers, Half-Bridge Drivers applications.
- Workstations
- CD players
- DVD players
- Networking Microprocessor Voltage Regulators
- Notebook Computers
- OA equipments
- High-Performance Gaming Motherboards
- Quad DC motor
- Audio-visual equipment
- Voltage Regulators for GPUs