VN5E010MHTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 16 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-7, DPak (6 Leads + Tab) |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 10mOhm |
| Subcategory | Peripheral Drivers |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.85mm |
| Base Part Number | VN5E010 |
| Pin Count | 6 |
| JESD-30 Code | R-PSSO-G6 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 85A |
| Supply Voltage-Max (Vsup) | 28V |
| Power Supplies | 8/28V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | On/Off |
| Operating Supply Current | 1.5mA |
| Current - Output (Max) | 60A |
| Nominal Supply Current | 1.5mA |
| Output Configuration | High Side |
| Output Current | 85A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 120A |
| Rds On (Typ) | 10m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 2.4mm |
| Length | 6.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN5E010MHTR-E Overview
As a result, it is packaged in the form of a Tape & Reel (TR).It is included with the TO-252-7, DPak (6 Leads + Tab) package as well.Surface Mount is the mounting type of the LED driver.This switch is of type General Purpose.To ensure reliable operation, set the temperature to -40°C~150°C TJ.By default, it is set to output 1.The LED driving board operates at Not Required volts.It has a maximum output voltage of N-Channel volts.In terms of features, the LED driving board has Auto Restart.The VN5E010 family consists of this type.A total of 6 terminations have been recorded.7 pins are used for operation.There are 1 functions of the LED driver.The lighting driver's maximum output is 60AV.The maximum output current must drop to 85A to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 13V.Surface Mount is mounted in the way of this LED driving board.There are 6 pins in total on this board.The LED driver has 10mOhm resistance.This electrical component is included in the VIPower? series.As a result, the output current is set to 85A.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.The Vsup value (maximum supply voltage) is set to 28V.Normal operation requires Vsup above 4.5V.In this case, the power supply is 8/28V.
VN5E010MHTR-E Features
Supplied from 13V
Resistance of 10mOhm
VN5E010MHTR-E Applications
There are a lot of STMicroelectronics VN5E010MHTR-E Power Switches ICs applications.
- Hard Disk Drives
- Handheld Devices
- Storage Drives
- Hot Swap
- PDAs
- Notebook PC
- Gaming
- Low Voltage I/O System Power
- Mobile Communication Devices
- USB Power Distribution