VN5010AKTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 18 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-PowerBSOP (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 10mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VN5010 |
| Pin Count | 24 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 46A |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 46A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Turn On Time | 35 µs |
| Output Peak Current Limit-Nom | 65A |
| Rds On (Typ) | 10m Ω (Max) |
| Turn Off Time | 65 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 2.47mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN5010AKTR-E Overview
It is packaged in the manner of a Tape & Reel (TR).It is included with the 24-PowerBSOP (0.295, 7.50mm Width) package as well.The lighting driver is mounted in the Surface Mount position.There is a General Purpose switch type associated with it.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.As a default, the output is set to 1.The LED driving board operates with a supply voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.Currently, the LED driving board is equipped with Auto Restart features.It belongs to the family VN5010.A total of 24 terminations have been found in it.In order to operate, the 24 pins are used.The LED driver has 1 functions.The maximum output current must drop to 46A to meet the operation criteria.Supply voltages of 13V allow for high efficiency.Surface Mount is mounted in the way of this LED driving board.A total of 24 pins are present on it.There is 10mOhm resistance on the LED driver.This electrical component can be found in the VIPower? series.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.Vsup (maximum supply voltage) is set to 36V.In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 4.5V.In this case, the power supply is 8/36V.
VN5010AKTR-E Features
Supplied from 13V
Resistance of 10mOhm
VN5010AKTR-E Applications
There are a lot of STMicroelectronics VN5010AKTR-E Power Switches ICs applications.
- PDAs
- Low Voltage I/O System Power
- USB3.1 Power Delivery
- PC Cards
- Wearable Devices
- Solid-State Drives
- Hot Swap
- Hot Swap
- Handheld Devices
- Set-Top Boxes