VN16B-E
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Pentawatt-5 (Vertical, Bent and Staggered Leads) |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 5 |
| Resistance | 38mOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 82W |
| Terminal Position | ZIG-ZAG |
| Reach Compliance Code | unknown |
| Base Part Number | VN16 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 20A |
| Operating Supply Voltage | 26V |
| Interface | On/Off |
| Nominal Supply Current | 25μA |
| Output Configuration | High Side |
| Power Dissipation | 82W |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 25μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 6V |
| Max Input Voltage | 26V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~26V |
| Driver Number of Bits | 1 |
| Fault Protection | Open Load Detect, Over Temperature |
| Rds On (Typ) | 60m Ω (Max) |
| RoHS Status | ROHS3 Compliant |
VN16B-E Overview
Tube is how it's packaged.The Pentawatt-5 (Vertical, Bent and Staggered Leads) package includes it.The lighting driver has the mounting type Through Hole.General Purpose is the switch type that it owns.To ensure reliable operation, set the temperature to -40°C~150°C TJ.The lighting driver is equipped with 1 outputs that can be used.The LED driving board operates at Not Required volts.A maximum output voltage of N-Channel volts can be achieved by this LED driver.The lighting driver has Status Flag features.It comes under the family of VN16.The termination count is 5.In order to operate, the 5 pins are used.As a result, the maximum output current is reduced to 20A in order to meet the operation requirements.As a result, it is mounted in the manner of Through Hole.The LED driver has 38mOhm resistance.When this case is used, the output current is set to 20A.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.A supply voltage of 26V is recommended for maximum efficiency.There is a maximum input voltage of 26V volts.As far as input voltage goes, it has a minimum of 6V volts.It requires a maximum current requirement of 25μA.
VN16B-E Features
Resistance of 38mOhm
VN16B-E Applications
There are a lot of STMicroelectronics VN16B-E Power Switches ICs applications.
- HDD and SSD
- Set-top-box
- Notebook PC
- Low Voltage I/O System Power
- Hot Swap
- PC Cards
- Storage (HDDs, SSDs)
- HDD, SSD
- Storage Drives
- Wearable Devices