VIPER28HE
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 10-SDIP (0.300, 7.62mm) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPer™ plus |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Power (Watts) | 16W |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 20W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VIPER28 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 800V |
| Input Voltage-Nom | 14V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 2.5mA |
| Output Current | 1.2A |
| Voltage - Supply (Vcc/Vdd) | 8.5V~23.5V |
| Max Supply Current | 3.5mA |
| Output Power | 20W |
| Input Voltage (Min) | 8.5V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 115kHz |
| Input Voltage (Max) | 23.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 80 % |
| Output Isolation | Isolated |
| Voltage - Start Up | 14V |
| Height Seated (Max) | 5.33mm |
| Length | 10.16mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VIPER28HE Overview
The ac to dc converter is embedded in 10-SDIP (0.300, 7.62mm) package.You can get it in AC/DC power converter Tube .As you can see, this AC/DC converter is mounted in the way of Through Hole .This ac dc converter should be operated at a temperature of -40°C~150°C TJ °C so that it can deliver its performance.In this AC DC converter, an analog integrated circuit (IC) of type SWITCHING CONTROLLER is employed.Switching frequency reaches 115kHz Hz.Supply voltage (Vcc/Vdd) does not need to exceed 8.5V~23.5V .Total terminations are 10 .It contains 10 pins.The ac-dc converter has 10 pins.Through Hole is the recommended mounting method for the ac dc converters.It is a member of VIPer? plus manufacturer family.The VIPER28 family allows you to search for similar acdc converters.Running 1 outputs is available.AC to DC converter is contained in Switching Regulator or Controllers .In this AC to DC transformer, the output current is set to 1.2A .As a result, its output voltage is 800V .Using a unique technique, it is possible to ensure an input voltage with a maximum value of 23.5V .A coverter produces 20W watts of output power.The maximum supply current AC to DC converter can handle is 3.5mA .
VIPER28HE Features
Packaged with 10-SDIP (0.300, 7.62mm)
Switching Frequency at 115kHz
With 10 pins
Output Current at 1.2A
VIPER28HE Applications
There are a lot of STMicroelectronics VIPER28HE AC DC Converters applications.
- Standby power supplies for VCR
- White goods
- AC?DC USB chargers for Cameras
- Air conditioners
- AC/DC LED Driver applications
- 3.3V power supplies
- Z-Wave
- Standby Power Supplies
- Switching AC-DC Adapter
- Chargers for cell/cordless phones