VIPER15LN
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPer™ plus |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Power (Watts) | 10W |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 12W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | VIPER15 |
| Pin Count | 7 |
| Number of Outputs | 1 |
| Input Voltage-Nom | 14V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 900μA |
| Nominal Supply Current | 2.5mA |
| Voltage - Supply (Vcc/Vdd) | 8.5V~23.5V |
| Output Power | 12W |
| Input Voltage (Min) | 8.5V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 136kHz |
| Input Voltage (Max) | 23.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage |
| Output Isolation | Isolated |
| Voltage - Breakdown | 800V |
| Voltage - Start Up | 14V |
| Height | 3.3mm |
| Length | 9.27mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VIPER15LN Overview
In the package 8-DIP (0.300, 7.62mm), 7 Leads , the ac to dc converter is embedded.The AC/DC power converter is available in Tube .The AC/DC converter is mounted in the way of Through Hole .To deliver its performance, the ac dc converter should be operated at a temperature of -40°C~150°C TJ .A SWITCHING CONTROLLER analog integrated circuit is used in this AC DC converter.As a result, the switching frequency reaches 136kHz .It can be used within the range of 8.5V~23.5V supply voltage (Vcc/Vdd).In total, it has 7 terminations.A ac/dc converter with 7 pins is available.The pins of the ac-dc converter total to 7 .There are no problem mounting the ac dc converters by Through Hole .It is a member of VIPer? plus manufacturer family.If you select the VIPER15 family, you will be able to search for similar acdc converters.AC to DC converter is necessary to run 1 outputs.The ac to dc conversions are included in Switching Regulator or Controllers .On the basis of a unique technique, the input voltage can be ensured to be 23.5V .In the AC to DC transformer of a coverter, the output power generated is 12W .
VIPER15LN Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 136kHz
With 7 pins
VIPER15LN Applications
There are a lot of STMicroelectronics VIPER15LN AC DC Converters applications.
- Standby power
- Standby Power Supplies
- Laptops
- Power adapters for monitors
- Open Frame Switching Power Supply
- RCC SMPS
- Battery chargers for cellular phones
- AC/DC Adaptors/Chargers for PDAs
- Standby power supplies for VCR
- Appliances