VEMD2020X01
| Parameters | |
|---|---|
| Factory Lead Time | 17 Weeks |
| Contact Plating | Tin |
| Mount | PCB, Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 2-SMD, Gull Wing |
| Number of Pins | 2 |
| Shape | ROUND |
| Semiconductor Material | Silicon |
| Operating Temperature | -40°C~100°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | Automotive, AEC-Q101 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2A (4 Weeks) |
| Additional Feature | DAY LIGHT FILTER, HIGH SENSITIVITY |
| HTS Code | 8541.40.60.50 |
| Subcategory | Photo Diodes |
| Max Power Dissipation | 215mW |
| Number of Functions | 1 |
| Configuration | SINGLE |
| Diode Type | PIN |
| Power Dissipation | 215mW |
| Viewing Angle | 30° |
| Forward Current | 50mA |
| Breakdown Voltage | 32V |
| Size | 1.8mm |
| Rise Time | 100ns |
| Forward Voltage | 1V |
| Fall Time (Typ) | 100 ns |
| Max Reverse Voltage (DC) | 60V |
| Reverse Breakdown Voltage | 60V |
| Wavelength | 940nm |
| Reverse Voltage (DC) | 60V |
| Dark Current | 1nA |
| Spectral Range | 750nm ~ 1050nm |
| Active Area | 0.23mm2 |
| Infrared Range | YES |
| Light Current-Nom | 0.012mA |
| Height | 2.77mm |
| Length | 2.3mm |
| Width | 2.3mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VEMD2020X01 Overview
A Tape & Reel (TR) package protects these photodiodes from damage. For safety reasons, the photodiodes are packaged in 2-SMD, Gull Wing packages. A continuous voltage of 60V should not be applied to the photodiodes in reverse-bias mode. There are 2 pins on the photodiodes. Photodiodes on a circuit are capable of emitting 215mW heat. It is recommended that the reverse anode voltage on the photodiodes be 60V. An ideal circuit would allow the photodiodes to release a maximum amount of heat in the form of 215mW heat. Photodiodes can work properly at 60V reverse voltage in the DC circuit. In order for a photodiode to pass current, you need a voltage of 1V. You need a breakdown voltage of 32V to make sure photodiodes work. The photodiode will operate at 1nA current even in the absence of light input.
VEMD2020X01 Features
Moisture Sensitivity Level (MSL): 2A (4 Weeks)
Operating Temperature: -40°C~100°C
Packaging: Tape & Reel (TR)
Diode Type: PIN
Mount: PCB, Surface Mount
Spectral Range: 750nm ~ 1050nm
Viewing Angle: 30°
VEMD2020X01 Applications
There are a lot of Vishay Semiconductor Opto Division VEMD2020X01 Photodiodes applications.
- Infrared remote control
- Light Barriers
- Shaft encoders
- Photo interrupters
- High speed photo detector
- Heart Rate Monitoring
- Medical and Industrial
- Vision Controls
- Sterilization Lamp Monitoring
- Measurement Levelling