UDK2559EB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Peripheral Drivers |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | UDK2559 |
| Pin Count | 28 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Output Type | Bipolar |
| Max Output Current | 1A |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Interface | On/Off |
| Nominal Supply Current | 80mA |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | 4.75V~5.25V |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Characteristics | OPEN-COLLECTOR |
| Output Current per Channel | 700mA |
| Output Polarity | INVERTED |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | STANDARD |
| Voltage - Load | 60V Max |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Turn On Time | 20 μs |
| Output Peak Current Limit-Nom | 1A |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Output Current Flow Direction | SINK |
| Length | 11.51mm |
| Width | 11.51mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
UDK2559EB Overview
It is package in Tube case.Package 28-LCC (J-Lead) contains it.This LED driving board is mounted using the mounting type Surface Mount.This switch is of type General Purpose.Keeping the temperature at -40°C~125°C TA ensures reliable operation.There are 4 outputs available on this lighting driver.A voltage of 4.75V~5.25V is used to power it.A maximum output voltage of Bipolar volts can be obtained with this LED driver.It is a member of the UDK2559 family.It contains 28 terminations.For operation, we use the 28 pins.It contains 4 functions.This operation requires the maximum output current to be decreased to 1A.It is possible to achieve a high level of efficiency with a supply voltage of 5V.The lighting driver is mounted in the direction of Surface Mount.The LED driver has a total of 28 pins.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.The lighting driver is configured to have a maximum supply voltage of 5.25V (Vsup).In this part, the power supply is set to 5V.
UDK2559EB Features
Supplied from 5V
UDK2559EB Applications
There are a lot of Allegro MicroSystems UDK2559EB Power Switches ICs applications.
- Smartphone and PDA
- Wireless/Networking Cards
- USB Ports/Hubs
- Wireless Modem Data Cards
- Solid-State Drives
- Smart Phones, Feature Phones
- PC Cards
- Set-Top Boxes
- Handheld Devices
- Hot Swap