TS862IDT
| Parameters | |
|---|---|
| Voltage Gain | 240dB |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Max Input Current | 300pA |
| Input Bias Current | 300pA |
| Current - Quiescent (Max) | 16μA |
| Voltage - Input Offset (Max) | 15mV @ 5V |
| Current - Input Bias (Max) | 300pA @ 5V |
| CMRR, PSRR (Typ) | 70dB CMRR |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 10 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 710mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | TS862 |
| Pin Count | 8 |
| Output Type | Push-Pull |
| Number of Elements | 2 |
| Nominal Supply Current | 28μA |
| Power Dissipation | 710mW |
| Max Supply Current | 28μA |
| Propagation Delay | 2 μs |
| Quiescent Current | 16μA |
| Response Time | 2000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~10V |
| Input Offset Voltage (Vos) | 15mV |
TS862IDT Overview
A convenient transport package is provided in 8-SOIC (0.154, 3.90mm Width) .The comparator has an output type of Push-Pull .This package has been designed with Tape & Reel (TR) .8 terminals are found on the comparator.Electronic comparator is a component of the Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.The type of the chip can be classified as General Purpose .There are a total of 2 elements in it.As a result, it contains 8 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .As a precaution, it is recommended to set the operating temperature to -40°C~85°C to prevent malfunctions.The comparator has 8 pins.Search TS862 to find more pin-to-pin solutions.There is a quiescent current of 16μA in this comparator.Electronic comparator has a Surface Mount for mounting on PCB or other boards.Normal use of the device should require a nominal supply current of 28μA .If the current supply exceeds 28μA , the comparator might be damaged.Electronic comparator is possible to input a maximum current of 300pA into the device.Comparator electronics is clear from the voltage formula that the voltage gain of the part is 240dB .
TS862IDT Features
Push-Pull output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 16μA
Voltage Gain: 240dB
TS862IDT Applications
There are a lot of STMicroelectronics TS862IDT linear comparators applications.
- General-Purpose, Low-Voltage Applications
- Wearable Devices
- Ultra-Low Power Systems
- Motor drives
- Portable and Battery-Powered Systems
- Mobile Phones
- Security Detection Systems
- Power management
- Notebooks and PDAs
- Limit Comparators