TS3704CDT
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 830mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | TS3704 |
| Pin Count | 14 |
| Output Type | CMOS, Push-Pull |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 80μA |
| Power Dissipation | 830mW |
| Output Current | 20mA |
| Max Supply Current | 25μA |
| Quiescent Current | 25μA |
| Response Time | 1.2 μs |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Output Current per Channel | 4mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Power Supply Rejection Ratio (PSRR) | 92dB |
| Supply Voltage Limit-Max | 18V |
| Max Input Current | 1pA |
| Input Bias Current | 600pA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 1pA @ 5V |
| CMRR, PSRR (Typ) | 80dB CMRR |
| Height | 1.65mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS3704CDT Overview
The product is packaged in 14-SOIC (0.154, 3.90mm Width) to facilitate transportation.The comparator has an output type of CMOS, Push-Pull .The chip is packaged with Tape & Reel (TR) .The comparator has a total of 14 terminals.Electronic comparator is a part of Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 3V voltage.Electronic comparator is possible to classify the chip as General Purpose .This is a 4 element comparator.As a result, it contains 14 pins.The recommended mounting type is Surface Mount .A temperature setting of 0°C~70°C should be used for the operating temperature in order to prevent malfunctions.This comparator has 14 pins.In case you are looking for more pin-to-pin solutions, you may want to search TS3704 .There is 25μA current flowing in this comparator.The PCB or other board has a Surface Mount for mounting.For normal use of the device, the nominal supply current should be 80μA .If the current supply exceeds 25μA , the comparator might be damaged.5V power supplies are enough to run the device.You can input a maximum current of 1pA into this device.
TS3704CDT Features
CMOS, Push-Pull output capability
General Purpose IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 25μA
TS3704CDT Applications
There are a lot of STMicroelectronics TS3704CDT linear comparators applications.
- Zero-Crossing Detectors
- DC/DC and AC/DC power supplies
- Power management
- Mobile Phones and Tablets
- General Purpose Low Voltage Applications
- Security Detection Systems
- Set Top Boxes
- Automatic Test Equipment
- High-Speed Differential Line Receiver
- Body Control Modules