TS339CN
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 1.5W |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Base Part Number | TS339 |
| Pin Count | 14 |
| Output Type | CMOS, Open-Drain |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 20μA |
| Power Dissipation | 1.5W |
| Output Current | 20mA |
| Max Supply Current | 20μA |
| Quiescent Current | 25μA |
| Response Time | 1.5 μs |
| Common Mode Rejection Ratio | 75 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Output Current per Channel | 2nA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Supply Voltage Limit-Max | 18V |
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 1pA @ 5V |
| CMRR, PSRR (Typ) | 75dB CMRR |
| Height Seated (Max) | 5.1mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS339CN Overview
The product is packaged in 14-DIP (0.300, 7.62mm) to facilitate transportation.The comparator has a type CMOS, Open-Drain output.This device is designed in Tube case.The comparator has 14 terminals.The electrical component here belongs to the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 3V .Electronic comparator can be classified as a General Purpose chip.There are a total of 4 elements in it.There are 14 pins on this board.Electronic comparator is recommended to mount using type Through Hole .Electronic comparator is recommended that you set the operating temperature to 0°C~70°C in order to prevent malfunctions.The comparator consists of 14 pins.You can find more pin-to-pin solutions for your special requirements by searching TS339 .A quiescent current of 25μA is observed in this comparator.A Through Hole is provided for mounting it onto a PCB or another board.The nominal supply current of the device should be 20μA for normal use.If the current supply exceeds 20μA , the comparator could malfunction.In order to run the device, there are only 5V power supplies required.
TS339CN Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 25μA
TS339CN Applications
There are a lot of STMicroelectronics TS339CN linear comparators applications.
- Zero-Crossing Detectors
- System control and monitoring
- Wide Range VCO; MOS Clock Timers
- RC Timers
- General Purpose Low Voltage Applications
- Set Top Boxes
- Window Comparators
- Zero-Crossing Detectors
- Portable Battery Monitoring
- Metering Systems