TS331ILT
| Parameters | |
|---|---|
| Factory Lead Time | 14 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | TS331 |
| Pin Count | 5 |
| Output Type | Open Drain |
| Operating Supply Voltage | 3V |
| Number of Elements | 1 |
| Nominal Supply Current | 33μA |
| Output Current | 93mA |
| Max Supply Current | 33μA |
| Propagation Delay | 720 ns |
| Quiescent Current | 26μA |
| Response Time | 420 ns |
| Common Mode Rejection Ratio | 79 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5V |
| Output Current per Channel | 93mA |
| Input Offset Voltage (Vos) | 500μV |
| Voltage Gain | 100dB |
| Power Supply Rejection Ratio (PSRR) | 79dB |
| Max Input Current | 40nA |
| Input Bias Current | 30nA |
| Current - Quiescent (Max) | 26μA |
| Max Junction Temperature (Tj) | 150°C |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.04μA @ 5V |
| CMRR, PSRR (Typ) | 79dB CMRR |
| Natural Thermal Resistance | 250 °C/W |
| Current - Output (Typ) | 93mA @ 5V |
| Height | 1.45mm |
| Length | 2.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS331ILT Overview
To facilitate transportation, it comes packaged in SC-74A, SOT-753 .There is a Open Drain output type for this comparator.We ship the part through Tape & Reel (TR) .The device is designed with 5 terminations.The electrical component in this case belongs to the Comparator families.Electronic comparator is capable of performing numerous tasks when powered by 1.8V voltage.It's a typical General Purpose comparator.A total of 1 elements can be found in it.Electronic comparator has 5 pins.In general, mounting type Surface Mount is recommended.Electronic comparator is recommended that the operating temperature be set to -40°C~125°C to prevent malfunctions.5 pins are available on the comparator.If you require more pin-to-pin solutions, search TS331 for more options.There is a quiescent current of 26μA in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.Normal use of the device should require a nominal supply current of 33μA .An excess of current supply over 33μA could result in malfunction of the comparator.There is a maximum current that can be input into the device of 40nA .Based on the voltage formula, the voltage gain of the part is 100dB .Comparator electronics is necessary to have a voltage of 3V for normal operation.
TS331ILT Features
Open Drain output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 26μA
Voltage Gain: 100dB
TS331ILT Applications
There are a lot of STMicroelectronics TS331ILT linear comparators applications.
- Window Comparators
- System control and monitoring
- Point of load regulators
- Power Supervision
- Battery-Powered Electronics
- Analog front end
- Mobile Phones and Tablets
- Security Detection Systems
- Consumer Medical Electronics
- Laptop Computers