TPIC6C596DG4
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 155.100241mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Series | TPIC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | TPIC6C596 |
| Function | Serial to Parallel, Serial |
| Output Type | Open Drain |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Load Capacitance | 30pF |
| Propagation Delay | 80 ns |
| Turn On Delay Time | 80 ns |
| Family | 6C |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 1 |
| Number of Output Lines | 9 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
TPIC6C596DG4 Overview
Embedded in a package of type 16-SOIC (0.154, 3.90mm Width), the device is available for use. Chip terminations add up to 16. It is used to pack in Tube case. The part's operating supply voltage is rated 5V. Devices with 16 pins are available. Using Surface Mount as a mount point is recommended. Electronic components fall under the category of 6C. There is a component mounted in the way of Surface Mount on this board. It is important to note that the operating temperature range is -40°C~125°C. There is a voltage supply within 4.5V~5.5V. In the TPIC series, this electrical component is found. By using the TPIC6C596 family, you can find similar parts. A range of 5V is noted as the operating supply voltage of this chip. This section has the following additional features: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. 1 input lines are available on the device. Voltage can be delivered at 5V by the device. 9 output lines are available for operation.
TPIC6C596DG4 Features
With 16 pins
Mounted in Surface Mount type.
Based on TPIC6C596 family
Operate supply voltage at 5V
It supplies 5V power
With 9 output lines
TPIC6C596DG4 Applications
There are a lot of Texas Instruments TPIC6C596DG4 Shift Registers applications.
- Serial to parallel converter
- Remote control holding register
- Interconnectors
- Data Format Converters
- Pattern Recognizers
- Flash Memory
- Serial-to-parallel data conversion
- Parallel to serial converter
- Output expansion
- Cache memory in CPU