TNY288PG
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2015 |
| Series | TinySwitch®-4 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| Terminal Finish | MATTE TIN |
| Power (Watts) | 16W |
| Additional Feature | SEATED_HT CALCULATED |
| Power Rating | 21.5W |
| Max Power Dissipation | 28W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Number of Outputs | 1 |
| Output Voltage | 265V |
| Max Supply Voltage | 265V |
| Min Supply Voltage | 85V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 650μA |
| Output Power | 28W |
| Control Features | EN |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Frequency - Switching | 124kHz~140kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 67 % |
| Output Isolation | Isolated |
| Voltage - Breakdown | 725V |
| Height Seated (Max) | 4.06mm |
| Length | 9.44mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
TNY288PG Overview
This ac to dc converter is included in the package 8-DIP (0.300, 7.62mm), 7 Leads .It is available in Tube AC/DC power converter.Through Hole is mounted in the way of this AC/DC converter.It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ °C in order to achieve its full performance.Analog ICs of type ANALOG CIRCUIT are used in this AC DC converter.124kHz~140kHz is the switching frequency.As a result, it has a total of 7 terminations.Approximately 7 pins are present on the ac/dc converter.The ac dc converters are suitable to mount by Through Hole .It belongs to a manufacturer family of TinySwitch?-4 .Running 1 outputs is available.There is 265V output voltage from this AC/DC converter.Here is the standard for REACH SVHC : No SVHC .The AC to DC converter input voltage can be powered under 265V .It is assumed that a coverter generates 28W as its output power.When utilizing this ACDC converter, SEATED_HT CALCULATED can also be discovered.An input voltage of less than 85V volts is acceptable for use with this AC to DC inverter.It is capable of working with a minimum supply voltage of 85V volts.
TNY288PG Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 124kHz~140kHz
With 7 pins
TNY288PG Applications
There are a lot of Power Integrations TNY288PG AC DC Converters applications.
- RCC SMPS
- Air conditioners
- Wireless System
- Adaptors for Portable Media Player
- Power adapters for network devices
- Battery Chargers
- Power Adaptors
- Low-Voltage I/O System Power
- 3.3V power supplies
- Standby power supplies for VCR