TNY280PN
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Weight | 2.26799g |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2009 |
| Series | TinySwitch®-III |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Power Rating | 14W |
| Max Power Dissipation | 36.5W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 132kHz |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 12V |
| Output Type | Adjustable |
| Input Voltage-Nom | 2.2V |
| Max Supply Voltage | 265V |
| Min Supply Voltage | 85V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 630μA |
| Output Current | 750mA |
| Output Power | 36.5W |
| Control Features | EN |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 65 % |
| Max Junction Temperature (Tj) | 150°C |
| Max Supply Voltage (AC) | 265V |
| Duty Cycle | 65% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Supply Voltage (AC) | 85V |
| Height | 4.06mm |
| Length | 9.83mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TNY280PN Overview
8-DIP (0.300, 7.62mm), 7 Leads is the package in which the ac to dc converter is embedded.You can get it in AC/DC power converter Tube .There is a mounting point for this AC/DC converter in the way of Through Hole .For the ac dc converter to perform at its best, it should be operated at a temperature of -40°C~150°C TJ °C.This AC DC converter employs SWITCHING REGULATOR analog IC type.There are a total of 7 terminations in it.In this ac/dc converter, there are 7 pins.There are 8 pins in total.It is suitable for mounting by Through Hole .This AC to DC converter belongs to the TinySwitch?-III family of manufacturers.Running 1 outputs is available.The output current is set to 750mA .This AC/DC converter produces a voltage of 12V as its output.A high efficiency can be achieved by operating at a frequency of 132kHz .Here is the standard for REACH SVHC : No SVHC .Input voltage for the AC to DC converter is available under 265V .36.5W is the output power of a coverter.It is possible to use the AC to DC inverter with an input voltage less than 85V V.A minimum voltage supply across the converter is 85V .There is a maximum voltage supply across the converter of 265V volts.As long as the supply voltage is 85V , it will operate.It is configured to output Adjustable .
TNY280PN Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
With 7 pins
Output Current at 750mA
Output Type : Adjustable
TNY280PN Applications
There are a lot of Power Integrations TNY280PN AC DC Converters applications.
- Power adapters for network devices
- Open Frame Switching Power Supply
- Battery chargers for cordless
- AC?DC USB chargers for Cameras
- Standby power supplies for TV
- Small off-line low voltage power supplies
- Home Appliance Applications
- Battery Chargers
- AC-DC Output Power Conversion Applications
- Shaver Charger