TNY278PG
| Parameters | |
|---|---|
| Topology | Flyback |
| Frequency - Switching | 132kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 65 % |
| Max Supply Voltage (AC) | 265V |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Supply Voltage (AC) | 85V |
| Length | 9.575mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Factory Lead Time | 4 Weeks |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Surface Mount | NO |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2009 |
| Series | TinySwitch®-III |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Power (Watts) | 28W |
| Power Rating | 21.5W |
| Max Power Dissipation | 28W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T7 |
| Number of Outputs | 1 |
| Output Voltage | 12V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 445μA |
| Output Current | 1A |
| Output Power | 21.5W |
| Control Features | EN |
TNY278PG Overview
A ac to dc converter of the package 8-DIP (0.300, 7.62mm), 7 Leads contains the ac to dc converter.It is available in Tube AC/DC power converter.Through Hole is mounted in the way of this AC/DC converter.The ac dc converter should be operated at a temperature of -40°C~150°C TJ °C to deliver its optimal performance.The AC DC converter utilizes a type SWITCHING REGULATOR analog IC.The switching frequency reaches 132kHz .A total of 7 terminations have been recorded.The pins of the ac-dc converter count up to 8 .It is a member of TinySwitch?-III manufacturer family.A total of 1 outputs are to be processed.The output current is set to 1A .The voltage output by this AC/DC converter is 12V .In the AC to DC transformer of a coverter, the output power is 21.5W .A minimum voltage of 85V is required across the converter.Across the converter, the maximum supply voltage is 265V .
TNY278PG Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 132kHz
Output Current at 1A
TNY278PG Applications
There are a lot of Power Integrations TNY278PG AC DC Converters applications.
- Remotely-controlled appliances
- Linear Adapter Replacements
- IoT Applications
- Air Conditioning
- Adapter/Charger for Cordless Phones
- Battery chargers for media tablets
- Auxiliary Power Supply
- Standby power
- Standby power supplies for VCR
- Power adapters for network devices