TNY268GN
| Parameters | |
|---|---|
| Control Features | EN |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 68 % |
| Max Supply Voltage (AC) | 265V |
| Drain to Source Resistance | 5.2Ohm |
| Duty Cycle | 65% |
| Output Isolation | Isolated |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
| Length | 9.575mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD (7 Leads), Gull Wing |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | TinySwitch®-II |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Power Rating | 23W |
| Max Power Dissipation | 23W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 132kHz |
| Pin Count | 8/7 |
| JESD-30 Code | R-PDSO-G7 |
| Number of Outputs | 1 |
| Output Voltage | 700V |
| Output Type | Adjustable |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 380μA |
| Output Current | 880mA |
| Output Power | 15W |
TNY268GN Overview
It is embedded in package 8-SMD (7 Leads), Gull Wing .In Tube case, the ac dc converter is available.This AC/DC converter is mounted in the way of Surface Mount .For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~150°C TJ °C.SWITCHING REGULATOR analog ICs are employed in this AC DC converter.As a result, it has had 7 terminations.It contains 8 pins.The pins of the ac-dc converter count up to 8/7 .It belongs to the family of TinySwitch?-II manufacturers.The number of outputs to run is 1 .It has been set to 880mA for the output current.The output voltage of the AC/DC converter is 700V .This power AC DC is capable of reaching high efficiencies when operating at a frequency of 132kHz .Here is the standard for REACH SVHC : No SVHC .Input voltages under 265V can be used to power the AC to DC converter.In the AC to DC transformer of a coverter, the output power generated is 15W .A voltage of less than 85V V can be used with the AC to DC inverter.This converter requires a minimum supply voltage of 85V volts.This converter can operate at a maximum supply voltage of 265V .The input voltage (AC) that can be applied in the AC to DC power converter should under 265V .This output uses Adjustable .
TNY268GN Features
Packaged with 8-SMD (7 Leads), Gull Wing
With 8 pins
Output Current at 880mA
Output Type : Adjustable
TNY268GN Applications
There are a lot of Power Integrations TNY268GN AC DC Converters applications.
- Tablets
- Consumer electronics
- White goods
- AC/DC LED Driver applications
- Utility meters
- PDAs
- Rice Cooker
- Smartphones
- Shaver Charger
- Networking