TNY267PN
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | TinySwitch®-II |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Max Power Dissipation | 19W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T7 |
| Number of Outputs | 1 |
| Output Voltage | 5.8V |
| Output Type | Adjustable |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 315μA |
| Output Current | 481mA |
| Output Power | 12W |
| Control Features | EN |
| Topology | Flyback |
| Frequency - Switching | 132kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 68 % |
| Max Supply Voltage (AC) | 265V |
| Duty Cycle | 65% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Supply Voltage (AC) | 85V |
| Length | 9.575mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TNY267PN Overview
In the package 8-DIP (0.300, 7.62mm), 7 Leads , the ac to dc converter is embedded.Tube case is available for the ac dc converter.This AC/DC converter is mounted in the way of Through Hole .It is necessary to operate the ac dc converter at a temperature of -40°C~150°C TJ °C in order for it to perform properly.In this AC DC converter, the analog IC type is SWITCHING REGULATOR .As a result, the switching frequency reaches 132kHz .There have been 7 terminations of this program.There are a total of 8 pins on the ac-dc converter.It is suitable for mounting by Through Hole .It belongs to the manufacturer family of TinySwitch?-II .There are 1 outputs to run.We have set the output current to 481mA .In this AC to DC transformer, the output voltage is 5.8V .It is assumed that a coverter generates 12W as its output power.In order for the converter to function properly, the supply voltage must be at least 85V .There is a maximum supply voltage of 265V across the converter.The output it is configured with uses Adjustable .
TNY267PN Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 132kHz
Output Current at 481mA
Output Type : Adjustable
TNY267PN Applications
There are a lot of Power Integrations TNY267PN AC DC Converters applications.
- Small off-line low voltage power supplies
- Power tools fast chargers with trickle and on/off
- Standby Power Supplies
- Automotive Telematics
- Auxiliary Power Supply
- Remotely-controlled appliances
- Set Top Boxes (STB)
- Cleaners
- Standby power supplies for VCR
- Power adapters for monitors