TLC3702MDR
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 725mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLC3702 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 40μA |
| Power Dissipation | 725mW |
| Output Current | 20mA |
| Max Supply Current | 40μA |
| Propagation Delay | 4.5 μs |
| Quiescent Current | 90μA |
| Response Time | 2700 ns |
| Common Mode Rejection Ratio | 84 dB |
| Voltage - Supply, Single/Dual (±) | 4V~16V |
| Output Current per Channel | 8mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.00003μA |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Input Bias Current | 5pA |
| Current - Quiescent (Max) | 90μA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 5pA @ 5V |
| CMRR, PSRR (Typ) | 84dB CMRR |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC3702MDR Overview
In order to facilitate transportation, it is packaged in 8-SOIC (0.154, 3.90mm Width) .There is a comparator of type CMOS, Push-Pull, TTL output on this device.The part is shipped by Tape & Reel (TR) .The comparator has 8 terminals.The chip belongs to Comparator .A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.A comparator of this type is typically of type General Purpose .Currently, it consists of only 2 elements.The pinout of the component starts from 8 pins it has.Electronic comparator is recommended to mount the device using type Surface Mount .Ideally, the operating temperature should be set at -55°C~125°C in order to prevent malfunction.The comparator consists of 8 pins.You can search TLC3702 if you are looking for more pin-to-pin solutions.There is a quiescent current of 90μA in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Electronic comparator is recommended that the nominal supply current of the device be 40μA .If the current supply exceeds 40μA , the comparator could malfunction.Electronic comparator is sufficient to run the device wElectronic comparatorh 5V power supplies.Comparator electronics is a comparator part from the LinCMOS? series.Comparator electronics is necessary to have an operating supply voltage of 5V for normal operation.With a TR package, this device is designed for general use (usually in ADC circuits).
TLC3702MDR Features
CMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -55°C~125°C
Quiescent Current: 90μA
TLC3702MDR Applications
There are a lot of Texas Instruments TLC3702MDR linear comparators applications.
- Infotainment and Clusters
- Wireless Base Stations
- Limit Comparators
- DC/DC and AC/DC power supplies
- Consumer Medical Electronics
- Appliances
- Ultra-Low Power Systems
- Hand-Held Electronics
- Notebooks and PDAs
- Automotive