TL3016CPW
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 525mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TL3016 |
| Pin Count | 8 |
| Output Type | Complementary, Push-Pull, TTL |
| Number of Elements | 1 |
| Nominal Supply Current | 12.5mA |
| Power Dissipation | 525mW |
| Output Current | 20mA |
| Max Supply Current | 12.5mA |
| Propagation Delay | 10 ns |
| Quiescent Current | 12.5mA |
| Response Time | 7800 ns |
| Common Mode Rejection Ratio | 97 dB |
| Voltage - Supply, Single/Dual (±) | 5V~10V ±2.5V~5V |
| Input Offset Voltage (Vos) | 3mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Supply Voltage Limit-Max | 7V |
| Dual Supply Voltage | 5V |
| Input Bias Current | 10μA |
| Neg Supply Voltage-Max (Vsup) | -7V |
| Voltage - Input Offset (Max) | 3mV @ ±5V |
| Current - Input Bias (Max) | 10μA @ ±5V |
| CMRR, PSRR (Typ) | 97dB CMRR |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL3016CPW Overview
To facilitate transportation, it comes packaged in 8-TSSOP (0.173, 4.40mm Width) .There is a Complementary, Push-Pull, TTL output type for this comparator.The part will be shipped by Tube .The comparator has a total of 8 terminals.The electrical component in this case belongs to the Comparator family.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.Electronic comparator is possible to classify the chip as with Latch .Currently, it consists of only 1 elements.The pinout of the component starts from 8 pins it has.The recommended mounting method is Surface Mount .The operating temperature should be set to 0°C~70°C to avoid mal-function.The comparator has 8 pins.If you require more pin-to-pin solutions, search TL3016 for more options.As a result, this comparator displays a quiescent current of 12.5mA .Mounting on PCBs or other boards is easy with the Surface Mount .Normal operation of the device requires a nominal supply current of 12.5mA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 12.5mA .
TL3016CPW Features
Complementary, Push-Pull, TTL output capability
with Latch IC
Employing 1 elements
Operates under 0°C~70°C
Quiescent Current: 12.5mA
TL3016CPW Applications
There are a lot of Texas Instruments TL3016CPW linear comparators applications.
- General-Purpose, Low-Voltage Applications
- Body Control Modules
- Current and voltage sensing
- Wide Range VCO; MOS Clock Timers
- Automatic Test Equipment
- System control and monitoring
- Window Comparators, Multivibrators
- Zero-Crossing Detectors
- Motor drives
- Hand-Held Electronics