TEMD7000X01
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 0805 (2012 Metric) |
| Number of Pins | 2 |
| Shape | SQUARE |
| Semiconductor Material | Silicon |
| Operating Temperature | -40°C~100°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Additional Feature | HIGH SENSITIVITY |
| HTS Code | 8541.40.60.50 |
| Subcategory | Photo Diodes |
| Max Power Dissipation | 215mW |
| Number of Functions | 1 |
| Case Code (Metric) | 2012 |
| Case Code (Imperial) | 0805 |
| Configuration | SINGLE |
| Diode Type | PIN |
| Power Dissipation | 215mW |
| Viewing Angle | 120° |
| Forward Current | 50mA |
| Rise Time | 100ns |
| Forward Voltage | 1V |
| Fall Time (Typ) | 100 ns |
| Max Reverse Voltage (DC) | 60V |
| Power Consumption | 215mW |
| Reverse Breakdown Voltage | 60V |
| Wavelength | 900nm |
| Reverse Voltage (DC) | 60V |
| Dark Current | 1nA |
| Spectral Range | 430nm ~ 1100nm |
| Active Area | 0.23mm2 |
| Infrared Range | YES |
| Light Current-Nom | 0.003mA |
| Height | 850μm |
| Length | 2mm |
| Width | 1.25mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TEMD7000X01 Overview
In order to protect these photodiodes from damage, they are packaged in the Tape & Reel (TR). For safety reasons, the photodiodes are packaged in 0805 (2012 Metric) packages. It is recommended to set the reverse-bias mode for the photodiodes to not exceed 60V on a continuous basis. A photodiode is equipped with 2 pins. During a circuit, the photodiodes could release 215mW heat. A reverse anode voltage of 60V should be applied to the photodiodes. In general, the maximum heat generated by photodiodes should be 215mW in a circuit. If the reverse voltage is 60V, the photodiodes can operate properly in the DC circuit. The voltage needed to get current to flow across a photodiode should be 1V. Without light input, a photodiode will produce 1nA current.
TEMD7000X01 Features
Moisture Sensitivity Level (MSL): 3 (168 Hours)
Operating Temperature: -40°C~100°C
Packaging: Tape & Reel (TR)
Diode Type: PIN
Mount: Surface Mount
Spectral Range: 430nm ~ 1100nm
Viewing Angle: 120°
TEMD7000X01 Applications
There are a lot of Vishay Semiconductor Opto Division TEMD7000X01 Photodiodes applications.
- Position sensing
- Machine Controls
- Infrared remote control
- Vision Controls
- Industrial Automation
- Health Monitoring
- LiDAR
- Low Cost Light Monitoring
- Optical Analytics
- Currency Validation