T18SP6R
| Parameters | |
|---|---|
| Mount | Through Hole |
| Number of Pins | 4 |
| Housing Material | Polycarbonate |
| Operating Temperature | -40°C~70°C |
| Published | 2002 |
| Series | T18 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 10V~30V |
| Ingress Protection | NEMA 6P, IEC IP67, IEC IP69K |
| Approval Agency | CE, CSA, UL |
| Output Configuration | PNP - Dark-ON/Light-ON |
| Cable Length | 78.74 2m |
| Output Current | 150mA |
| Contact Current Rating | 150mA |
| Response Time | 3ms |
| Sensing Distance | 787.402 (20m) |
| Sensing Method | Through-Beam |
| Max Supply Voltage (DC) | 30V |
| Connection Method | Cable |
| Light Source | Infrared (950nm) |
| Min Supply Voltage (DC) | 10V |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Ratings | IP67, IP69K |
T18SP6R Overview
For reliable operation, the photoelectric sensor's temperature should be set to -40°C~70°C. If these electronic components are to work, they should receive 10V~30V voltage into the circuit or system. For photoelectric sensors, 3ms is considered an ideal response time. The photoelectric sensor must be connected to 4 pins in order to function properly. For a photoelectric sensor to function, the output current should be 150mA. A photoelectric sensor can withstand a voltage of 30V in a DC circuit without being damaged. Unlike most photoelectric sensors, this one operates at a very low voltage such as 0 volts.
T18SP6R Features
Sensing Distance: 787.402 (20m)
4 pins
Response Time: 3ms
Operating Temperature: -40°C~70°C
T18 Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
T18SP6R Applications
There are a lot of Banner Engineering Corporation T18SP6R Photoelectric Sensors applications.
- Entrance and gate
- Pharmaceutical industry
- Passive infrared sensors
- detect objects
- Contrast sensors
- Material handling
- Zone scanners
- Detecting colours
- Counting small objects
- Checking objects on production lines or conveyors