T18SN6R
| Parameters | |
|---|---|
| Number of Pins | 4 |
| Housing Material | Polycarbonate |
| Operating Temperature | -40°C~70°C |
| Published | 2008 |
| Series | T18 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 10V~30V |
| Ingress Protection | NEMA 6P, IEC IP67, IEC IP69K |
| Approval Agency | CE, CSA, UL |
| Output Configuration | NPN - Dark-ON/Light-ON |
| Cable Length | 78.74 2m |
| Output Current | 150mA |
| Contact Current Rating | 150mA |
| Response Time | 3ms |
| Sensing Distance | 787.402 (20m) |
| Sensing Method | Through-Beam |
| Max Supply Voltage (DC) | 30V |
| Connection Method | Cable |
| Light Source | Infrared (950nm) |
| Min Supply Voltage (DC) | 10V |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Ratings | IP67 |
T18SN6R Overview
The temperature of the photoelectric sensor should be set to -40°C~70°C to ensure reliable performance. The voltage of this electronic components should be given 10V~30V into a circuit or system to make it work. For photoelectric sensors, 3ms is ideal. To make the photoelectric sensor work properly, 4 pins must be connected. Photoelectric sensors are designed to operate with a current of 150mA at the output. When applied to a DC circuit, the maximum voltage that can be applied to the photoelectric sensor without damaging it is 30V. This photoelectric sensor can work at as low a voltage as possible, such as 10V.
T18SN6R Features
Sensing Distance: 787.402 (20m)
4 pins
Response Time: 3ms
Operating Temperature: -40°C~70°C
T18 Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
T18SN6R Applications
There are a lot of Banner Engineering Corporation T18SN6R Photoelectric Sensors applications.
- Mechanical engineering
- Automatic doors
- Luminescence sensors
- Entrance and gate
- Checking objects on production lines or conveyors
- Contrast sensors
- Logistics and materials handling
- Passive infrared sensors
- Measuring distance
- Material handling