T18SN6DQ
| Parameters | |
|---|---|
| Number of Pins | 4 |
| Body Material | PBT, Polyester |
| Operating Temperature | -40°C~70°C |
| Published | 2006 |
| Series | T18 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 10V~30V |
| Ingress Protection | NEMA 6P, IEC IP67, IEC IP69K |
| Approval Agency | CE, CSA, UL |
| Output Configuration | NPN - Dark-ON/Light-ON |
| Output Current | 150mA |
| Contact Current Rating | 150mA |
| Response Time | 3ms |
| Adjustment Type | Adjustable, Potentiometer |
| Sensing Distance | 19.685 (500mm) |
| Sensing Method | Diffuse |
| Max Supply Voltage (DC) | 30V |
| Connection Method | Connector |
| Light Source | Infrared (880nm) |
| Min Supply Voltage (DC) | 10V |
| Diameter | 30mm |
| Height | 41.7mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Ratings | IP69K |
T18SN6DQ Overview
It's important to set the photoelectric sensor's temperature to -40°C~70°C for reliable performance. For these electronic components to function, a voltage of 10V~30V should be applied to a circuit or system. An ideal response time for photoelectric sensors is 3ms. To make the photoelectric sensor work properly, 4 pins must be connected. It needs a current of 150mA at the output to work. DC circuit can apply a maximum voltage of 30V without harming the photoelectric sensor. As low a voltage as possible, such as 10V, can be used by this photoelectric sensor.
T18SN6DQ Features
Sensing Distance: 19.685 (500mm)
4 pins
Response Time: 3ms
Operating Temperature: -40°C~70°C
T18 Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
T18SN6DQ Applications
There are a lot of Banner Engineering Corporation T18SN6DQ Photoelectric Sensors applications.
- Material handling
- Counting small objects
- Monitoring bigger areas for objects with light grids
- Luminescence sensors
- Passive infrared sensors
- Checking objects on production lines or conveyors
- Zone scanners
- Detecting colours
- Contrast sensors
- Entrance and gate