STP08C596B1
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Display Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Current Rating | 120mA |
| Frequency | 25MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | STP08C |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 14.1mA |
| Max Supply Current | 14.1mA |
| Voltage - Output | 16V |
| Topology | Shift Register |
| Internal Switch(s) | Yes |
| fmax-Min | 25 MHz |
| Number of Segments | 8 |
| Voltage - Supply (Min) | 4.5V |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 5.1mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STP08C596B1 Overview
In order to save board space, the 16-DIP (0.300, 7.62mm) package is used. Using this LED driver, there are 8 outputs.Through Hole is used to mount the led light driver.When it emerges as a Linear, it performs extremely well and is highly reliable.-40°C~125°C TA is the operating temperature for the led light driver.The frequency of 25MHz is used as the basis for its operation.16 terminations are designed for its operation.The LED light driver has a base configuration of 16 pins.There may be undetermined failures if the voltage supply falls below 4.5V.The segment count is 8.There is a mounting of it by Through Hole.The base part number for this LED driver is STP08C.It is acceptable for the voltage to be 5.5V.This device produces a voltage of 16V volts.In addition, it is equipped with a total of 16 pins.In addition to Display Drivers, [1] is assigned in accordance with its characteristics.To meet the highest efficiency standards, it can be operated with a minimum supply voltage of 4.5V.It is possible to obtain a high efficiency with this device when the maximum supply current is less than 14.1mA.
STP08C596B1 Features
Available in the 16-DIP (0.300, 7.62mm) package
Operating temperature of -40°C~125°C TA
Frequency of 25MHz
Supply voltage of 5V
STP08C596B1 Applications
There are a lot of STMicroelectronics STP08C596B1 LED Driver ICs applications.
- LED Lightings for Inspection Devices
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Other Electronic Devices
- General lighting
- LED backlight driver for LCD displays for portable equipment
- A- lamps
- LED Lightings for Industrial Equipment
- Stage Lighting and Signage
- Portable lighting
- Medical surgery lighting