STMPS2141STR
| Parameters | |
|---|---|
| Factory Lead Time | 14 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 120mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 32.5mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Current Rating | 500mA |
| Base Part Number | STMPS2141 |
| Pin Count | 5 |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Operating Supply Voltage | 5.5V |
| Voltage | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 40μA |
| Current | 500mA |
| Output Configuration | High Side |
| Power Dissipation | 32.5mW |
| Output Current | 0A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 40μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 5 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Number of Inputs | 1 |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5V |
| Turn-Off Delay Time | 10 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 90m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 1.3mm |
| Length | 3mm |
| Width | 1.75mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STMPS2141STR Description
STMPS2141STR power distribution switch intended for applications where heavy capacitive loads and short-circuits are likely to be encountered. The STMicroelectronics STMPS2141STR incorporates 90mohm N-channel MOSFET high-side power switches for power distribution. The STMPS2141STR switche is controlled by a logic enable input.
When the output load exceeds the current limit threshold or a short is present, the device limits the output current to a safe level by switching into a constant current mode. When continuous heavy overloads and short-circuits increase the power dissipation in the switch, causing the junction temperature to rise, a thermal protection circuit shuts the switch off to prevent damage. Recovery from a thermal shutdown is automatic once the device has cooled sufficiently. Internal circuitry ensures the switch remains off until a valid input voltage is present.
STMPS2141STR Features
12 μA maximum standby supply current
Ambient temperature range from -40°C to 85°C
CMOS and TTL compatible enable input
Undervoltage lockout (UVLO)
8KV ESD protection
Reverse current protection
Fault blanking
500/1000mA continuous current
Thermal and short-circuit protection with overcurrent logic output
Operating range from 2.7V to 5.5V
STMPS2141STR Applications
power distribution
power savings
charge emulation in USB port power applications
load switches
current limit switches
STMPS2141STR power distribution switch intended for applications where heavy capacitive loads and short-circuits are likely to be encountered. The STMicroelectronics STMPS2141STR incorporates 90mohm N-channel MOSFET high-side power switches for power distribution. The STMPS2141STR switche is controlled by a logic enable input.
When the output load exceeds the current limit threshold or a short is present, the device limits the output current to a safe level by switching into a constant current mode. When continuous heavy overloads and short-circuits increase the power dissipation in the switch, causing the junction temperature to rise, a thermal protection circuit shuts the switch off to prevent damage. Recovery from a thermal shutdown is automatic once the device has cooled sufficiently. Internal circuitry ensures the switch remains off until a valid input voltage is present.
STMPS2141STR Features
12 μA maximum standby supply current
Ambient temperature range from -40°C to 85°C
CMOS and TTL compatible enable input
Undervoltage lockout (UVLO)
8KV ESD protection
Reverse current protection
Fault blanking
500/1000mA continuous current
Thermal and short-circuit protection with overcurrent logic output
Operating range from 2.7V to 5.5V
STMPS2141STR Applications
power distribution
power savings
charge emulation in USB port power applications
load switches
current limit switches