STM32F446RCT6
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 64-LQFP |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | STM32F4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | 3A991.A.2 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 180MHz |
| Base Part Number | STM32F446 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 1.8/3.3V |
| Supply Voltage-Min (Vsup) | 1.7V |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 50 |
| RAM Size | 128K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.7V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M4 |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | CANbus, EBI/EMI, I2C, IrDA, LINbus, SAI, SD, SPDIF-Rx, SPI, UART/USART, USB, USB OTG |
| Supply Current-Max | 115mA |
| Bit Size | 32 |
| Data Converter | A/D 16x12b; D/A 2x12b |
| Has ADC | YES |
| DMA Channels | YES |
| PWM Channels | YES |
| Address Bus Width | 24 |
| ROM (words) | 262144 |
| On Chip Program ROM Width | 8 |
| CPU Family | CORTEX-M4F |
| External Data Bus Width | 32 |
| Length | 10mm |
| Width | 10mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STM32F446RCT6 Description
The STM32F446RCT6 devices use the ARM Cortex-M4 32-bit RISC CPU, which runs at up to 180 MHz. The Cortex-M4 processor includes a single-precision floating point unit (FPU) that supports all ARM single-precision data-processing instructions and data formats. It also has a memory protection unit (MPU) and a full set of DSP instructions, which improves application security.
STM32F446RCT6 Features
Microcontroller with ARM? 32bit Cortex?-M4 CPU + FPU, frequency up to 180MHz in 64 pin LQFP package
256Kbytes of flash memory, 128Kbytes system/4Kbytes of backup SRAM
LCD parallel interface, 8080/6800 modes
1.7V to 3.6V application supply and I/Os, 4 to 26MHz crystal oscillator
50 GPIO, two 12bit ADC (16 channels), 2 x 12bit D/A converters
General-purpose DMA (16-stream DMA controller with FIFOs and burst support)
10 general purpose, 2 advanced control, 2 basic timers
SWD & JTAG interfaces, Cortex-M4 Trace Macrocell?
CRC calculation unit, camera interface
SPI / I2S, I2C, USART/UART, USB OTG FS/HS, CAN, SAI, SDIO, SPDIF-Rx, HDMI-CEC, Quad SPI
STM32F446RCT6 Applications
Data Acquisition
Low-cost Sensor integration
Low power Embedded devices.
Small data retention related purposes
The STM32F446RCT6 devices use the ARM Cortex-M4 32-bit RISC CPU, which runs at up to 180 MHz. The Cortex-M4 processor includes a single-precision floating point unit (FPU) that supports all ARM single-precision data-processing instructions and data formats. It also has a memory protection unit (MPU) and a full set of DSP instructions, which improves application security.
STM32F446RCT6 Features
Microcontroller with ARM? 32bit Cortex?-M4 CPU + FPU, frequency up to 180MHz in 64 pin LQFP package
256Kbytes of flash memory, 128Kbytes system/4Kbytes of backup SRAM
LCD parallel interface, 8080/6800 modes
1.7V to 3.6V application supply and I/Os, 4 to 26MHz crystal oscillator
50 GPIO, two 12bit ADC (16 channels), 2 x 12bit D/A converters
General-purpose DMA (16-stream DMA controller with FIFOs and burst support)
10 general purpose, 2 advanced control, 2 basic timers
SWD & JTAG interfaces, Cortex-M4 Trace Macrocell?
CRC calculation unit, camera interface
SPI / I2S, I2C, USART/UART, USB OTG FS/HS, CAN, SAI, SDIO, SPDIF-Rx, HDMI-CEC, Quad SPI
STM32F446RCT6 Applications
Data Acquisition
Low-cost Sensor integration
Low power Embedded devices.
Small data retention related purposes