STM32F100C8T6BTR
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Surface Mount | YES |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | STM32F1 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 363mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Frequency | 24MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STM32F100 |
| Pin Count | 48 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.3V |
| Supply Voltage-Min (Vsup) | 2.4V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 37 |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M3 |
| Peripherals | DMA, PDR, POR, PVD, PWM, Temp Sensor, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 64KB 64K x 8 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 10x12b; D/A 2x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 7 |
| ROM (words) | 65536 |
| Core Architecture | ARM |
| On Chip Program ROM Width | 8 |
| CPU Family | CORTEX-M3 |
| Height Seated (Max) | 1.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STM32F100C8T6BTR Description
The high-performance ARM? Cortex?-M3 32-bit RISC core, operating at a 24 MHz frequency, high-speed embedded memories (Flash memory up to 128 Kbytes and SRAM up to 8 Kbytes), and a wide range of enhanced peripherals and I/Os connected to two APB buses are all included in the STM32F100x4, STM32F100x6, STM32F100x8, and STM32F100xB microcontroller One 12-bit ADC, two 12-bit DACs, up to six general-purpose 16-bit timers, and an advanced-control PWM timer are all standard features of each device, along with up to two I2Cs, two SPIs, one HDMI CEC, and up to three USARTs.
Operating on a 2.0 to 3.6 V power supply, the STM32F100xx low- and medium-density devices operate in temperature ranges of - 40 to + 85 °C and - 40 to + 105 °C, respectively.
STM32F100C8T6BTR Features
2.0 to 3.6 V application supply and I/Os
POR, PDR and programmable voltage detector (PVD)
4-to-24 MHz crystal oscillator
Internal 8 MHz factory-trimmed RC
Internal 40 kHz RC
PLL for CPU clock
32 kHz oscillator for RTC with calibration
Up to two I2C interfaces (SMBus/PMBus)
Up to 3 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control)
Up to 2 SPIs (12 Mbit/s)
Consumer electronics control (CEC) interface
STM32F100C8T6BTR Applications
Power Management
Consumer Electronics
Portable Devices
Industrial