STG3682QTR
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-UFQFN |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 5.2Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 1.12W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Base Part Number | STG3682 |
| Pin Count | 10 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 3V |
| Polarity | Non-Inverting |
| Number of Channels | 1 |
| Max Supply Voltage | 4.3V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 100nA |
| Nominal Supply Current | 1μA |
| Power Dissipation | 1.12W |
| Max Supply Current | 100nA |
| Turn On Delay Time | 31 ns |
| Data Rate | 480 Mbps |
| Number of Inputs | 2 |
| Supply Type | Single |
| Bandwidth | 800MHz |
| Turn-Off Delay Time | 22 ns |
| On-State Resistance (Max) | 5.2Ohm |
| High Level Output Current | 128mA |
| Low Level Output Current | 128mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 79 dB |
| Current - Leakage (IS(off)) (Max) | 20nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF |
| On-state Resistance Match-Nom | 0.3Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 15ns, 13ns |
| Charge Injection | 5pC |
| Channel-to-Channel Matching (ΔRon) | 300m Ω |
| Crosstalk | -78dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 18ns |
| Voltage - Supply, Single (V+) | 1.65V~4.3V |
| Height Seated (Max) | 0.55mm |
| Length | 1.8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STG3682QTR Overview
This electronic part is conveniently packaged in 10-UFQFN, making it easy to ship abroad. The advanced packaging method Tape & Reel (TR) provides high reliability. This analog switch is mounted in Surface Mount. 2:1 is the number of circuits in the multiplexer and demultiplexer. Temperatures around -40°C~85°C TA are extended for operation. Totally, there are 10 terminations. High-quality output is provided by the electronic component's 1 channels. With a 3V voltage supply, the electrical component should be turned on and run. This electrical component is included in the 10 series of products. A SPDT switching circuit is used to build these analog multiplexers. Search with STG3682 if you are looking for analog multiplexer variants. A 5.2Ohm internal resistance characterizes this multiplexer. Datasheets for 10 pin functions are available upon request. It is a typical Multiplexer or Switches analog multiplexer. In a normalsituation, users should not supply the switches with voltage higher than 4.3V. Single supply type digital switch with a low cost. A low voltage of 1.65V should be applied to the electronic component. It would be sufficient to run this analogue multiplexer with 100nA current. This analogue multiplexer requires a voltage of 1.65V~4.3V when it drains from a single voltage supply. The analogue multiplexer may be damaged if voltage is greater than 100nA. This electrical part is compatible with 3V operating voltages. Operating 2 inputs is required. A 800MHz-bandwidth can be used for data transfer. The analog switch ics includes 4 outputs.
STG3682QTR Features
1 Channels
Switch Circuit: SPDT
100nA Supply Current
Bandwidth: 800MHz
STG3682QTR Applications
There are a lot of STMicroelectronics STG3682QTR Analog Switches & Multiplexers ICs applications.
- E1 Network Equipment
- Precision instrumentation
- Precision data acquisition
- Public switching systems
- CSU
- Industrial and process control systems
- Cable PC
- SONET
- Imaging
- Low-Voltage