ST890CD
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 90mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ST890 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Nominal Supply Current | 13mA |
| Output Configuration | High Side |
| Output Current | 1.2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 13mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Adjustable), Over Temperature |
| Turn On Time | 50 μs |
| Output Peak Current Limit-Nom | 1.2A |
| Rds On (Typ) | 75m Ω |
| Built-in Protections | OVER CURRENT; THERMAL |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
ST890CD Overview
Tube is how it's packaged.In the 8-SOIC (0.154, 3.90mm Width) package, it is included.In this case, the LED driving board is mounted as Surface Mount.There is a switch type of General Purpose.Ensure reliable operation by setting the temperature to -40°C~85°C TA.By default, it is set to output 1.In order to operate, it requires a voltage supply of Not Required.There is a maximum output voltage of P-Channel volts.There is a ST890 family of things that it belongs to.As a result, there are 8 terminations.The 8 pins are used to operate the LED driver.It contains 1 functions.A supply voltage of 3V leads to high efficiency.It is positioned in the direction of Surface Mount.This LED driver is equipped with a total of 8 pins.Currently, the LED driving board has a resistance of 90mOhm ohms.As a result, the output current is set to 1.2A.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.It has a power supply of 3/5V.For maximum efficiency, the supply voltage should be set to 5.5V.This LED driving board can accept voltages up to 5.5V volts as an input.There is a minimum input voltage of 2.7V volts.There is a maximum current requirement of 13mA for its operation.
ST890CD Features
Supplied from 3V
Resistance of 90mOhm
ST890CD Applications
There are a lot of STMicroelectronics ST890CD Power Switches ICs applications.
- Wireless Modem Data Cards
- USB Power Distribution
- USB Protection
- Hot Swaps
- PDAs
- Storage Drives
- Hot-Swap Systems
- Various applications equipped with buttons
- Solid State Drivers
- Wireless Headsets