SNJ54S195J
| Parameters | |
|---|---|
| Package / Case | CDIP |
| Surface Mount | NO |
| Pbfree Code | no |
| Number of Terminations | 16 |
| Additional Feature | COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT |
| HTS Code | 8542.39.00.01 |
| Subcategory | Shift Registers |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 125°C |
| Operating Temperature (Min) | -55°C |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 15pF |
| Number of Bits | 4 |
| Family | S |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Screening Level | MIL-PRF-38535 |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 16.5 ns |
| Power Supply Current-Max (ICC) | 99mA |
| fmax-Min | 70 MHz |
| Count Direction | RIGHT |
| Height Seated (Max) | 5.08mm |
| Length | 19.56mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
SNJ54S195J Overview
The device is embedded in CDIP package. Chip terminations add up to 16. 5V is the part's operating supply voltage. This electronic component is classified as S. Additionally, please note the following: COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT. For this part, the minimum supply voltage (Vsup) should not be less than 4.5V. Devices with voltage delivery capabilities of 5V are available. A maximum supply voltage (Vsup) of 5.5V may be applied to this part. It has 4 bits in total. 16 pins are present on it. The subcategory in which it falls belongs to is Shift Registers. Temperatures above 125°C must be avoided.
SNJ54S195J Features
It supplies 5V power
SNJ54S195J Applications
There are a lot of Texas Instruments SNJ54S195J Shift Registers applications.
- 8-bit data storage
- Dual-rank shift, hold, and bus applications
- Parallel to serial converter
- Pattern Recognizers
- Pulse Extenders
- Delay Line
- Serial-to-parallel data conversion
- Serial-to-parallel data conversion
- ROM Chips
- Remote control holding register