SNJ54LS674J
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 24 |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | HOLD MODE; READ/WRITE CONTROL; CHIP SELECT DISABLES BOTH SERIAL & PARALLEL OPERATIONS |
| Packing Method | TUBE |
| Technology | TTL |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 24 |
| Output Type | TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 45pF |
| Number of Bits | 16 |
| Propagation Delay | 45 ns |
| Turn On Delay Time | 45 ns |
| Family | LS |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Prop. Delay@Nom-Sup | 40 ns |
| Screening Level | MIL-PRF-38535 |
| Trigger Type | NEGATIVE EDGE |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 40mA |
| fmax-Min | 20 MHz |
| Height | 4.91mm |
| Length | 31.75mm |
| Width | 13.4mm |
| Thickness | 4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SNJ54LS674J Overview
The device is embedded in CDIP package. Chip terminations add up to 24. 5V is the operating supply voltage of the part. It is a part that has 1 elements on it. 24 pins are located on the device. It is recommended to mount by Through Hole in order to get the best results. Electronic components fall under the category of LS. A range of 5V is noted as the operating supply voltage of this chip. Please take note of the following additional aspects of this section: HOLD MODE; READ/WRITE CONTROL; CHIP SELECT DISABLES BOTH SERIAL & PARALLEL OPERATIONS. It has 16 bits in total. There are a total of 24 pins on it. Temperatures below 125°C are recommended for use. It should not be lower than -55°C to operate this device. We use this supply voltage under 5.5V. It is used at a voltage greater than 4.5V. There is a TUBE packaging for the part.
SNJ54LS674J Features
With 24 pins
Operate supply voltage at 5V
Packing Method : TUBE
SNJ54LS674J Applications
There are a lot of Texas Instruments SNJ54LS674J Shift Registers applications.
- store data in digital form
- 7-segment display control
- Data manipulation
- Cache memory in CPU
- Remote control holding register
- Output expansion
- Sequence generator
- Data Processors
- temporary data storage
- Remote control holding register