SNJ54LS673FK
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Number of Pins | 28 |
| Packaging | Rail/Tube |
| Number of Terminations | 28 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; ASYNCHRONOUS CLEAR FOR STORAGE REGISTER; COMMON SERIAL I/O PIN |
| Technology | TTL |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Output Type | TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 45pF |
| Number of Bits | 16 |
| Propagation Delay | 45 ns |
| Family | LS |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Max I(ol) | 0.024 A |
| Prop. Delay@Nom-Sup | 40 ns |
| Screening Level | MIL-PRF-38535 |
| Trigger Type | NEGATIVE EDGE |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 80mA |
| fmax-Min | 20 MHz |
| Max Frequency@Nom-Sup | 20000000Hz |
| Height | 2.03mm |
| Length | 11.43mm |
| Width | 11.43mm |
| Thickness | 1.83mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SNJ54LS673FK Overview
A total of 28 terminations can be found on the chip. This item is packed in case Rail/Tube. A voltage of 5V is specified for the part's operating supply. The part consists of 1 elements. There are 28 pins on the device. Surface Mount is recommended for mounting. Electronic components are categorized as LS. It is noted that the operating supply voltage of this chip falls within the range 5V. The following additional elements are important to note: PARALLEL OUTPUT IS REGISTERED; ASYNCHRONOUS CLEAR FOR STORAGE REGISTER; COMMON SERIAL I/O PIN. A total of 16 bits are present on an IC chip. There are a total of 28 pins on it. A temperature below 125°C is recommended for its use. For this device to operate, it cannot be lower than -55°C. It is employed under the condition of 5.5V. It is important to note that this supply voltage is higher than 4.5V.
SNJ54LS673FK Features
With 28 pins
Operate supply voltage at 5V
SNJ54LS673FK Applications
There are a lot of Texas Instruments SNJ54LS673FK Shift Registers applications.
- Pattern Recognizers
- data transfer
- Interconnectors
- Serial to parallel converter
- Data Format Converters
- 8-bit data storage
- Data manipulation
- 7-segment display control
- Serial-to-parallel data conversion
- data manipulation