SNJ54LS597W
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Number of Pins | 16 |
| Packaging | Rail/Tube |
| Number of Terminations | 16 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | COMMON I/O PINS; MIXED SERIAL INPUTS; TOTEMPOLE SERIAL OUTPUT |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | FLAT |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 45pF |
| Number of Bits | 8 |
| Propagation Delay | 60 ns |
| Family | LS |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Max I(ol) | 0.024 A |
| Prop. Delay@Nom-Sup | 30 ns |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 53mA |
| fmax-Min | 35 MHz |
| Max Frequency@Nom-Sup | 20000000Hz |
| Height | 2.03mm |
| Length | 10.3mm |
| Width | 6.73mm |
| Thickness | 1.65mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
SNJ54LS597W Overview
A total of 16 terminations can be found on the chip. Rail/Tube is the case in which it is packed. Its operating supply voltage is rated at 5V. On this part, there are 1 elements. In this device, there are 16 pins. Surface Mount is recommended for mounting. This electronic component is classified as LS. In terms of supply voltage, this chip operates within the range of 5V. The following additional aspects of this section are worth noting: COMMON I/O PINS; MIXED SERIAL INPUTS; TOTEMPOLE SERIAL OUTPUT. It has 8 bits in total. There are a total of 16 pins on it. Under 125°C, it is recommended that it be used. Ideally, it should not fall below -55°C. A voltage of 5.5V is employed as the supply voltage. This supply voltage is employed higher than 4.5V.
SNJ54LS597W Features
With 16 pins
Operate supply voltage at 5V
SNJ54LS597W Applications
There are a lot of Texas Instruments SNJ54LS597W Shift Registers applications.
- LED matrix control
- Pseudo Random Pattern Generator
- ROM Chips
- Serial-to-parallel data conversion
- data transfer
- Serial-to-parallel data conversion
- Cache memory in CPU
- Remote control holding register
- Delay Line
- 7-segment display control