SNJ54LS595W
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Number of Pins | 16 |
| Packaging | Rail/Tube |
| Number of Terminations | 16 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | FLAT |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 30pF |
| Number of Bits | 8 |
| Propagation Delay | 38 ns |
| Family | LS |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Max I(ol) | 0.024 A |
| Prop. Delay@Nom-Sup | 25 ns |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 65mA |
| fmax-Min | 20 MHz |
| Height | 2.03mm |
| Length | 10.3mm |
| Width | 6.73mm |
| Thickness | 1.65mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
SNJ54LS595W Overview
A total of 16 terminations can be found on the chip. It is packed in a case number Rail/Tube. There is 5V operating supply voltage listed on the part. On this part, there are 1 elements. It has 16 pins. Surface Mount is recommended for mounting. An electronic component is included in the LS. This chip's operating supply voltage is reported as 5V. The following additional aspects of this section are worth noting: PARALLEL OUTPUT IS REGISTERED. Devices with voltage delivery capabilities of 5V are available. A total of 8 bits are present on the IC chip. There are a total of 16 pins on it. A temperature below 125°C is recommended for its use. It should not be less than -55°C when operating this device. A voltage of this type is employed under 5.5V. This supply voltage is employed higher than 4.5V.
SNJ54LS595W Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
SNJ54LS595W Applications
There are a lot of Texas Instruments SNJ54LS595W Shift Registers applications.
- store data in digital form
- Interconnectors
- 7-segment display control
- Data Format Converters
- 8-bit data storage
- Data manipulation
- Pulse Extenders
- Delay Line
- Sequence generator
- data manipulation