SNJ54LS195AW
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Number of Pins | 16 |
| Packaging | Rail/Tube |
| Pbfree Code | no |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | FLAT |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 4 |
| Propagation Delay | 30 ns |
| Family | LS |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Screening Level | MIL-PRF-38535 |
| Trigger Type | POSITIVE EDGE |
| fmax-Min | 30 MHz |
| Max Frequency@Nom-Sup | 30000000Hz |
| Height Seated (Max) | 2.03mm |
| Width | 6.73mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
SNJ54LS195AW Overview
A total of 16 terminations can be found on the chip. The Rail/Tube case contains it. This part has an operating supply voltage of 5V. 1 elements make up this part. It is equipped with a pin count of 16. It is recommended that the mount should be done by Surface Mount. In this case, the electronic component belongs to the LS. A range of 5V is noted as the operating supply voltage of this chip. The following additional elements are important to note: COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT. The device is capable of delivering voltage at 5V. A total of 4 bits are present on an IC chip. It has a total of 16 pins. Temperatures below 125°C are recommended for use. It should not be less than -55°C when operating this device. A voltage of this type is employed under 5.5V. This supply voltage is employed higher than 4.5V.
SNJ54LS195AW Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
SNJ54LS195AW Applications
There are a lot of Texas Instruments SNJ54LS195AW Shift Registers applications.
- Serial to parallel converter
- 8-bit data storage
- Parallel data
- Remote control holding register
- LED matrix control
- ROM Chips
- Dual-rank shift, hold, and bus applications
- Serial-to-parallel data conversion
- Flash Memory
- data manipulation