SNJ54195J
| Parameters | |
|---|---|
| Package / Case | CDIP |
| Surface Mount | NO |
| Pbfree Code | no |
| Number of Terminations | 16 |
| Additional Feature | EXTERNAL CLOCK GATED MASTER RESET AND USED AS SHIFT CLOCK |
| HTS Code | 8542.39.00.01 |
| Subcategory | Shift Registers |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 125°C |
| Operating Temperature (Min) | -55°C |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 15pF |
| Number of Bits | 4 |
| Family | TTL/H/L |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Screening Level | MIL-PRF-38535 |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 26 ns |
| Power Supply Current-Max (ICC) | 63mA |
| fmax-Min | 30 MHz |
| Count Direction | RIGHT |
| Height Seated (Max) | 5.08mm |
| Length | 19.56mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
SNJ54195J Overview
CDIP package contains the device. Taking the total number of terminations on the chip and adding them up, we get 16. Parts with a 5V operating supply voltage are specified. There is an electronic component in the TTL/H/L. Additional aspects of this section are as follows: EXTERNAL CLOCK GATED MASTER RESET AND USED AS SHIFT CLOCK. There must be a minimum supply voltage (Vsup) of 4.5V for this part. A voltage of 5V is possible with this device. A maximum supply voltage (Vsup) of 5.5V may be applied to this part. There are 4 bits in the IC chip. There are a total of 16 pins on it. Its subcategory belongs to Shift Registers. It should only be used at temperatures no greater than 125°C.
SNJ54195J Features
It supplies 5V power
SNJ54195J Applications
There are a lot of Texas Instruments SNJ54195J Shift Registers applications.
- Dual-rank shift, hold, and bus applications
- Generate time delay toward digital circuits
- Flash Memory
- Pattern Recognizers
- Data Processors
- Pulse Extenders
- Serial-to-parallel data conversion
- Delay Line
- Remote control holding register
- Parallel data