SN74S299N3
| Parameters | |
|---|---|
| Package / Case | PDIP |
| Surface Mount | NO |
| Pbfree Code | no |
| Number of Terminations | 20 |
| Additional Feature | HOLD MODE |
| HTS Code | 8542.39.00.01 |
| Subcategory | Shift Registers |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 70°C |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.75V |
| Load Capacitance | 45pF |
| Number of Bits | 8 |
| Family | S |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 21 ns |
| Power Supply Current-Max (ICC) | 225mA |
| fmax-Min | 50 MHz |
| Count Direction | BIDIRECTIONAL |
| Height Seated (Max) | 5.08mm |
| Length | 25.4mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
SN74S299N3 Overview
As a result, PDIP package contains the embedded device. 20 is the total number of terminations on the chip. Its operating supply voltage is rated at 5V. In the S series, the electronic component belongs. Additional aspects of this section include: HOLD MODE. This part must have a minimum supply voltage (Vsup) of 4.75V. It can deliver voltage at 5V. A maximum supply voltage (Vsup) of 5.25V may be applied to this part. There are 8 bits on the IC chip. It has a total of zero pins. This subcategory falls under the Shift Registers category. It should only be used at temperatures no greater than 70°C.
SN74S299N3 Features
It supplies 5V power
SN74S299N3 Applications
There are a lot of Texas Instruments SN74S299N3 Shift Registers applications.
- Dual-rank shift, hold, and bus applications
- ROM Chips
- data transfer
- Serial-to-parallel data conversion
- Cache memory in CPU
- temporary data storage
- Delay Line
- data manipulation
- Pulse Extenders
- Pseudo Random Pattern Generator