SN74S299DWR
| Parameters | |
|---|---|
| Package / Case | SOIC |
| Surface Mount | YES |
| Pbfree Code | no |
| Number of Terminations | 20 |
| Additional Feature | HOLD MODE |
| HTS Code | 8542.39.00.01 |
| Subcategory | Shift Registers |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| JESD-30 Code | R-PDSO-G20 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 70°C |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.75V |
| Load Capacitance | 45pF |
| Number of Bits | 8 |
| Family | S |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 21 ns |
| Power Supply Current-Max (ICC) | 225mA |
| fmax-Min | 50 MHz |
| Count Direction | BIDIRECTIONAL |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
SN74S299DWR Overview
This device can be found embedded within the package SOIC. Chip terminations add up to 20. A voltage of 5V is specified for the part's operating supply. In the S series, the electronic component belongs. This section has the following additional features: HOLD MODE. There should be no voltage less than 4.75V at the minimum supply voltage (Vsup). A voltage of 5V is possible with this device. The maximum supply voltage (Vsup) for this part should not be more than 5.25V. IC chips contain a total of 8 bits. It has a total of zero pins. It belongs to the subcategory of Shift Registers. It should only be used at temperatures below 70°C.
SN74S299DWR Features
It supplies 5V power
SN74S299DWR Applications
There are a lot of Texas Instruments SN74S299DWR Shift Registers applications.
- Parallel to serial converter
- LED matrix control
- Output expansion
- Pattern Recognizers
- Counter
- store data in digital form
- Flash Memory
- Cache memory in CPU
- Remote control holding register
- temporary data storage