SN74S194N3
| Parameters | |
|---|---|
| Package / Case | PDIP |
| Surface Mount | NO |
| Pbfree Code | no |
| Number of Terminations | 16 |
| Additional Feature | HOLD MODE; EXTERNAL CLOCK GATED WITH MODE CONTROL AND USED AS SHIFT CLOCK |
| HTS Code | 8542.39.00.01 |
| Subcategory | Shift Registers |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 70°C |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.75V |
| Load Capacitance | 15pF |
| Number of Bits | 4 |
| Family | S |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 16.5 ns |
| Power Supply Current-Max (ICC) | 135mA |
| fmax-Min | 70 MHz |
| Count Direction | BIDIRECTIONAL |
| Height Seated (Max) | 5.08mm |
| Length | 19.305mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
SN74S194N3 Overview
This device can be found embedded within the package PDIP. Chip terminations add up to 16. The part operates at 5V voltage. An electronic component is included in the S. Additionally, please note the following: HOLD MODE; EXTERNAL CLOCK GATED WITH MODE CONTROL AND USED AS SHIFT CLOCK. There should be no voltage less than 4.75V at the minimum supply voltage (Vsup). A voltage of 5V can be delivered by it. It should not exceed 5.25V in terms of the supply voltage (Vsup). A total of 4 bits are present on an IC chip. In total, there are 16 pins on it. It belongs to the Shift Registers subcategory. No temperature higher than 70°C should be used.
SN74S194N3 Features
It supplies 5V power
SN74S194N3 Applications
There are a lot of Texas Instruments SN74S194N3 Shift Registers applications.
- Remote control holding register
- Output expansion
- data manipulation
- Sequence generator
- Serial-to-parallel data conversion
- Serial-to-parallel data conversion
- Remote control holding register
- Cache memory in CPU
- store data in digital form
- Pseudo Random Pattern Generator