Parameters |
Package / Case |
PDIP |
Surface Mount |
NO |
Pbfree Code |
no |
Number of Terminations |
16 |
Additional Feature |
HOLD MODE |
HTS Code |
8542.39.00.01 |
Technology |
TTL |
Terminal Position |
DUAL |
Terminal Form |
THROUGH-HOLE |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
2.54mm |
Reach Compliance Code |
not_compliant |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Operating Temperature (Max) |
70°C |
Supply Voltage-Max (Vsup) |
5.25V |
Power Supplies |
5V |
Temperature Grade |
COMMERCIAL |
Supply Voltage-Min (Vsup) |
4.75V |
Load Capacitance |
15pF |
Number of Bits |
4 |
Family |
S |
Logic Function |
Shift Register |
Output Polarity |
TRUE |
Logic IC Type |
PARALLEL IN PARALLEL OUT |
Trigger Type |
POSITIVE EDGE |
Propagation Delay (tpd) |
16.5 ns |
Power Supply Current-Max (ICC) |
135mA |
fmax-Min |
70 MHz |
Count Direction |
BIDIRECTIONAL |
Max Frequency@Nom-Sup |
70000000Hz |
Height Seated (Max) |
5.08mm |
Length |
19.305mm |
Width |
7.62mm |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
SN74S194N Overview
PDIP is a package containing the embedded device. Chip terminations add up to 16. Its operating supply voltage is rated at 5V. It is a component of the S. Additionally, please note the following: HOLD MODE. There should be no less than 4.75V supply voltage (Vsup) for this part. Voltage can be delivered at 5V. It should not exceed 5.25V in terms of the supply voltage (Vsup). There are 4 bits on the IC chip. It has a total of zero pins. It should only be used at temperatures below 70°C.
SN74S194N Features
It supplies 5V power
SN74S194N Applications
There are a lot of Texas Instruments SN74S194N Shift Registers applications.
- Interconnectors
- Data Processors
- Serial-to-parallel data conversion
- Output expansion
- ROM Chips
- temporary data storage
- Pulse Extenders
- Delay Line
- Remote control holding register
- Cache memory in CPU