SN74LVC574APWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LVC574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 150MHz |
| Propagation Delay | 7.8 ns |
| Turn On Delay Time | 7 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 6.8ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Input Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC574APWRG4 Overview
The flip flop is packaged in 20-TSSOP (0.173, 4.40mm Width). D flip flop is included in the Tape & Reel (TR)package. There is a Tri-State, Non-Invertedoutput configured with it. Positive Edgeis the trigger it is configured with. There is an electric part mounted in the way of Surface Mount. A voltage of 1.65V~3.6Vis required for its operation. In the operating environment, the temperature is -40°C~125°C TA. A flip flop of this type is classified as a D-Type. In FPGA terms, D flip flop is a type of 74LVCseries FPGA. Its output frequency should not exceed 150MHz. A total of 1 elements are present. It consumes 10μA of quiescent current without being affected by external factors. There have been 20 terminations. The 74LVC574 family contains this object. A voltage of 1.8V is used as the power supply for this D latch. JK flip flop input capacitance is 4pF farads. An electronic device belonging to the family LVC/LCX/Zcan be found here. A part of the electronic system is mounted in the way of Surface Mount. Basically, it is designed with a set of 20 pins. The clock edge trigger type for this device is Positive Edge. The part you are looking for is included in FF/Latches. There are 8bits in its design. The superior flexibility of this product is achieved by using 8 circuits. As a result of its reliable performance, this T flip flop is suitable for TR. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. Its output current of 24mAallows for maximum design flexibility. 3input lines are available for you to choose from.
SN74LVC574APWRG4 Features
Tape & Reel (TR) package
74LVC series
20 pins
8 Bits
SN74LVC574APWRG4 Applications
There are a lot of Texas Instruments SN74LVC574APWRG4 Flip Flops applications.
- Single Down Count-Control Line
- Individual Asynchronous Resets
- ATE
- Count Modes
- QML qualified product
- Computers
- 2 – Bit synchronous counter
- High Performance Logic for test systems
- Control circuits
- Counters