SN74LV595ANSRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOP |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 10.2 ns |
| Turn On Delay Time | 25.5 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 9 |
| fmax-Min | 45 MHz |
| Max Frequency@Nom-Sup | 50000000Hz |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74LV595ANSRE4 Overview
There is an embedded device in the package SOP. 16 is the total number of terminations on the chip. There is a Tape and Reel case containing it. 2.5V is the part's operating supply voltage. The part consists of 1 elements. 16 pins are provided on the device. Surface Mount is recommended for mounting. It is a component of the LV/LV-A/LVX/H. A range of 5V is noted as the operating supply voltage of this chip. There are also the following additional considerations in this section: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. Voltage can be delivered at 3.3V. The total number of IC chip bits is 8. In total, there are 16 pins on it. Temperatures below 85°C are recommended for use. In order to operate the device, the value should not fall below -40°C. It is used under the 5.5V supply voltage. It is necessary to use a voltage that is higher than 2V to provide this supply. Operation is available on only 9 output lines.
SN74LV595ANSRE4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 3.3V power
With 9 output lines
SN74LV595ANSRE4 Applications
There are a lot of Texas Instruments SN74LV595ANSRE4 Shift Registers applications.
- ROM Chips
- Data Format Converters
- Data manipulation
- temporary data storage
- Interconnectors
- 8-bit data storage
- Remote control holding register
- Data Processors
- Serial-to-parallel data conversion
- LED matrix control